English
spanish
The Electronic Music Box
Manufacturers
Categories
- Audio Recording Hardware - (306)
- Bargain Basement - (91)
- Computers - (5)
- DJ Hardware and Software - (20)
- EMB Book Shop - (187)
- Guitar - (89)
- -Effect Plug In Software - (37)
- -Hardware - (46)
- -Audio Interfaces - (5)
- -Electric Guitars - (5)
- -Guitar Amps - (18)
- -MIDI Guitar - (5)
- -Pedals - (10)
- -Trainers - (1)
- -Tuners - (2)
- -How to Play Software - (6)
- Live Sound - (88)
- MIDI Hardware - (73)
- Music Software - (1140)
- Support/Lessons - (6)
- Used Gear - (139)
- Video Creation Hardware Software - (8)
Specials [more]
East West Hollywood BackUp Singers Mac PC Instrument eLicense
Save: 40% off
iZotope Stutter Edit 2 Up Grade Effects Plug In eLicense
Save: 71% off
Krank Chadwick Single Channel 50W Mercury Magnetics Tube Head
It has Mercury Magnetics transformers in it. This is 1 of 50 Chadwick Amplifiers built in this manner. These amps were built specifically for the introduction of the model at the NAMM show. It's serial CK013 and in Great Condition! There's a couple of scuffs on one top edge (see the picture) and a problem on the bottom where they didn't get the tolex right but it sounds great.
How great is this amp? Here's what some users on The Gear Page say about this amp built with the standard transformers:
CopperHead: "Chadwick is very versatile. Not a metal amp, the Chadwick will do unbelievable cleans all the way up to Lynch gain levels with a tubes screamer in front. Not at all what I would call "modern" or "metal". 80's tones is where it lives. Right in the middle of it's tonal spectrum, think Great White.Very punchy and clear. Powered loop. Loves pedals, gives them a full, lush quality that I've not heard in other amps. Very loud for 50 watts. Unique Gain, Drive, and Envelope controls for almost an infinite number of tones. There are two flavors of Chadwick. Chadwick I is a single channel, and the Chadwick II's are switchers.I own a Revolution Series One, and I just picked up this Chadwick Single channel, and I'm loving it so far. Very different tone than the Revolution or Krankenstein:"
DersertKev7: "I sold my ptp hand wired 1987x to get the Chadwick. The fact that it has a master volume control sold me on it! The rehearsal studio we use had one and after playing with it for a few hours was convinced. I had always pegged Krank as a purely Nu-Metal brand so plugging into the Chadwick for the first time I was expecting to be dissapointed. I loved my Plexi but was unable to use it in smaller venues due to the fact that it is probably the loudest 50w amp ever devised by the human race. The Chadwick just made sense for my situation. Our other guitarist uses one of their 1980 heads and that is amazing as well."
The Krank Chadwick 50W Tube Guitar Head single channel with gain, drive, envelope, volume and 3-band EQ. Krank Chadwick has great flexibility for stage and studio.
Features
- 1 channels
- Volume and 3-band EQ
- 50 Watts
- Gain
- Drive
- Envelope Control
- Efx Loop with volume
- Line out
- 4-, 8-, and 16-ohm selectable impedance
$799.00
Krank Revolution 1 100W Tube Guitar Amp Head Red Chrome Grill
It's serial DB1014 so it's an early Krank in New Condition! A Classic!
How great is this amp? Here's what some users on Ultimate Guitar say about this amp:
rcdsm: "I've been playing for 16 years: guitar and bass. I've owned/played the following: Fender Bassman, Fender Super Reverb, Fender Twin, Marshall JCM 800, Marshall JCM 900, Marshall TSL 60, Ampeg V-4, Ampeg VL1002a, Mesa Dual-Rectifier Solo, Roland JC-120, Peavey Deuce II, Peavey XXX and far too many combo amps to remember. Out of all the amps mentioned, I would choose the Revolution over them hands down any day of the week for anything"
FacEraser117: "The Krank Revolution 1 head is a 100 watt tube amp that has more balls than any other amp made today. This amp has two amazing channels, the Krank channel which has an extreme in your face metal tone and the clean channel is also great."
The Krank Revolution 100W Tube Guitar Head has 2 channels with separate volume and 3-band EQs. 2 separate master volume controls on the distortion channel for lead boosting with a footswitch. Presence control for Kleen and Krank channels. Proprietary sweep control on the distortion channel changes the overall values for the entire amp, giving you an expansive range of modern and vintage tonal possibilities. 4 - 12AX7 preamp tubes, 4 - 5881 power tubes. Line out; 4-, 8-, and 16-ohm outs; and footswitch control of channel and master volume selections provide the Krank Revolution with great flexibility for stage and studio.
Features
- 2 channels
- Separate volume and 3-band EQs per channel
- 2 master volume controls on the distortion channel
- Presence control for both channels
- EQ sweep on the distortion channel
- 4 - 12AX7 preamp tubes
- 4 - 5881 power tubes
- Line out
- 4-, 8-, and 16-ohm selectable impedance
 - Lo Rez.jpeg)
Line 6 AMPLIFI 150 Guitar Amp with Bluetooth
ROCK YOUR CREATIVITY with the Line 6 AMPLIFI 150
Plug in. Let it rip.
AMPLIFi® is the world’s only full-range guitar amp and wireless speaker system. It combines amazing sound with a groundbreaking mobile app to make jamming, practicing, and recording so much fun, you won’t be able to put your guitar down. Instantly get incredible guitar tones matched to any song in your music library. Jam along with your favorite songs like you’re on stage with the band. Or use AMPLIFi as a USB recording interface and lay down tracks on your computer. Just pick up your guitar, immerse yourself in the music, and unleash your inner rock star.
AMPLIFi APP FOR iOS & ANDROID
You’ve never seen anything like this.
Technology has transformed many aspects of our lives, but the guitar experience has remained stuck in the past—until now. AMPLIFi Remote for iOS and Android™ brings the guitar experience to your digital life. You’ll discover a completely new way to jam with your favorite music (automatic tone matching!), dial in great sounds and share tones with a community of thousands of guitarists. Plus, with Apple Watch™ integration for iOS devices, control over functions like tuning, searching for tones and adjusting volumes is always within a hand's reach.
BLUETOOTH STEREO SPEAKER SYSTEM
Nothing else sounds this good. Or gets this loud.
Most Bluetooth® speakers deliver dinky-sounding audio with hardly any volume. And as musicians, we know that doesn’t cut it. That’s why we built AMPLIFi to be the world’s best Bluetooth speaker system. Wirelessly stream your favorite tracks from any Bluetooth enabled device directly to AMPLIFi, and the 5-way full-range stereo speaker system delivers incredible sound quality with volume to spare. No cables. No hassle. It’s the best sounding Bluetooth speaker—at any price.
HIGH-PERFORMANCE GUITAR AMP
Line 6 has been making amazing amps for more than 20 years, so we know what makes an amp sound incredible. We reinvented the guitar amp before, and now we've done it again. AMPLIFi combines innovative engineering, beautiful design and unique technology that immerses you in the glory of full-range guitar tones. Plug in. And let it rip.
Five powerful speakers. Stunning full-range sound.
Oh yeah, and did we mention that AMPLIFi is also an amazing-sounding guitar amplifier? A revolutionary multi-speaker configuration delivers sonic details that other guitar amps simply can’t produce. A ton of built-in DSP provides amazing-quality tones and effects. One hundred onboard presets offer all the tones you crave. And it comes in a powerful 150-watt model or portable 75-watt version—both of which provide more than enough power to rattle the windows.
Loaded with DSP.
AMPLIFi puts the Line 6 tones behind thousands of hit recordings at your fingertips. Create your own combination of pedals, effects processors, amp and cabinet models using the AMPLIFi Remote app for iOS and Android, then store them as presets—in the cloud, in the app or using the amp’s 100 onboard preset locations for instant access via FBV Shortboard MKII. AMPLIFi gives you just about any amp/FX chain you can imagine.
Prepare for a truly immersive guitar experience.
You've never heard a guitar amp sound this wide and spacious. AMPLIFi is loaded with five speakers that deliver the full sonic spectrum in a unique wet/dry configuration. By amplifying the dry and effects portions of your tone independently, AMPLIFi transmits every aspect of your tone in stunning detail—from crystal-clear highs to deep and smooth low end. Sans the muddiness that effects sometimes introduce. Chorus and reverb shimmer like never before, while overdrive and distortion pack an extra punch. Featuring two tweeters, two mid-bass drivers and a custom guitar speaker, the innovative AMPLIFi speaker design ensures every note will sound incredible.
CUSTOM DESIGNED 12” CELESTION SYSTEM
Proven guitar tone and performance.
Line 6 teamed up with Celestion®—one of the most celebrated and trusted speaker companies in the world—to create a 12” loudspeaker custom-designed for AMPLIFi 150. The speaker combines power and clarity to deliver exceptional sound quality—putting AMPLIFi 150 in a class of its own.
AMPLIFi 150
- 150 watts
- 12” custom Celestion speaker
- 2 mid-frequency drivers
- 2 high-frequency drivers
- 1/4” Guitar input and 1/8” Stereo Aux input
- 1/4” Headphone output
- Tap tempo/tuner
- 4 onboard presets (access unlimited presets via app)
- Stereo Wet/Dry Effects for immersive sound
- Compatible with Line 6 FBV MkII Foot Controllers
- Access 100 onboard presets via FBV Shortboard MKII (access unlimited presets via app)
- Toggle individual effects on and off within a single preset via FBV Shortboard MKII
- USB connection
- Bluetooth streaming audio (compatible with Android, iOS and Mac or PC)
AMPLIFi app
(compatible with iOS and Android)
- 70+ guitar amps, 100+ effects and 20+ speaker cabinets
- 8 simultaneous effects
- Remotely control amp parameters to dial in your sound
- Automatic tone matching instantly provides the perfect tones for jamming with songs in your music library
- Access thousands of tones online
- Share and rate tones in the cloud
- Backup and store unlimited presets in the cloud
- Compatible with iPod touch (5th generation), iPhone 5s, iPhone 5c, iPhone 5, iPhone 4s, iPhone 4, iPad (3rd and 4th generation), iPad 2 and iPad mini and these Android devices
- Share tones via Twitter and Facebook
Line 6 Catalyst 100 Guitar Amp
Line 6 Catalyst 100 Guitar Amp
CATALYST AMPLIFIERS
Original Amp Designs
The Catalyst® family includes three dual-channel combo amplifiers that perform like traditional guitar amps—while providing the increased versatility of modern amplifiers. From the 200-watt Catalyst 200, capable of holding its own on nearly any stage, to the 60-watt Catalyst 60, which is perfect for practice, recording, and performing in small venues—there’s a Catalyst amp for every player. Catalyst amplifiers offer six Original Amp Designs—ranging from pristine clean to modern high-gain—crafted using our renowned HX® sound design techniques to ensure exceptional tone and feel. These powerful and sturdily constructed combos are equally suited for stage or studio use, and feature an XLR line output and a 4-channel USB recording interface. Also included are Boost circuits customized for each amp type, a dedicated Reverb section with six reverb types, 18 additional effects, an effects loop, a Power Amp input for using Catalyst as a powered speaker, MIDI capabilities, and power attenuation options for playing at any volume. The free Catalyst Edit app for desktop and mobile devices provides deep editing capabilities. Add an optional LFS2 footswitch for even more flexibility, and an optional cover to protect your combo.
Designed for electric and electric-acostic guitarists, Line 6's Catalyst is a combo amplifier that offers six original amplifier designs from sparkling clean to blistering high gain. Catalyst features a familiar 2-channel control-panel layout and analog-style controls that allow you to dial up a great sound in seconds. Catalyst amplifiers offer 24 onboard effects, an FX loop, a power-amp input, a power level control, an XLR output, and a USB connection for deep editing or recording.
This amplifier is perfect for the guitarist who needs to consider every scenario in the studio, at rehearsal, and on the stage. The top panel features a variety of controls including Boost, Gain, EQ (3 band), Presence, Channel Volume, Effect Level, Reverb Level, and Master Volume. The rear panel provides an assortment of audio and control I/O including USB Type-B, footswitch, a 3.5mm aux input, a 1/4" headphone output, effects loop (send and return), ground lift, direct output, an output power control knob, which offers 100%, 50%, 1/2W, and Mute for recording or using just the headphone output for quiet practice sessions.
Features:
- •200-watt, dual-channel 2x12 combo amp (with optional LFS2 footswitch)
- •Catalyst 200 operates like a traditional amp - but provides increased versatility
- •6 Original Amp Designs - pristine clean to modern high-gain
- •Dedicated Boost and Reverb sections (6 reverb types), 18 Effects (3 types)
- •Power attenuator (half power, 0.5 watts, Mute) for reduced volume
- •XLR line output for pro connection to P.A. or recording devices
- •Effects loop and Power Amp input for integrating external devices
- •MIDI In via DIN connector or USB
- •4-channel audio interface, MIDI, and Mac®/iOS®/PC/Android TM connectivity via USB
- •Free Catalyst Edit app for desktop and mobile devices
Line 6 CATALYST 100 Specs
| Amplifier Type | Modeling |
| Output Power | 100 W RMS |
| Channels | 2 |
| Master Volume | Yes |
| Tone Section | Bass, Channel Volume, Gain, Mid, Presence, Treble |
| EQ | 3-Band Semi-Parametric |
| Built-In Effects | Delay, Harmonizer, Modulation, Octave, Reverb |
| Presets & Storage | User Presets: 12 |
| Effects Loop | Yes |
| Inputs | 1 x 1/4" Mono Instrument 1 x 1/8" Stereo Line Level 1 x 1/4" Mono Footswitch |
| Outputs | 1 x 1/4" Stereo Headphone 1 x XLR Mono DI |
| USB | 1 x USB-B Female (Host Connection, Preset Save/Load, Update) |
| Wireless Connectivity | None |
| Configuration | 1 x 12" Speaker |
| Cabinet Type | Straight Closed Mono |
| AC Input Power | 100 to 240 VAC, 50 / 60 Hz |
| Power Consumption | 150 W (Maximum) |
| Dimensions (WxHxD) | 22.2 x 18.8 x 10.2" / 56.4 x 47.8 x 26.0 cm Combo |
| Weight | 32.0 lb / 14.5 kg Combo |
| Package Weight | 42.03 lb |
| Box Dimensions (LxWxH) | 26 x 23 x 14" |
UPC: 614252321723
In accordance with California labeling requirements:
WARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov
$329.99
Line 6 Catalyst 200 Guitar Amp
Line 6 Catalyst 200 Guitar Amp
CATALYST AMPLIFIERS
Original Amp Designs
The Catalyst® family includes three dual-channel combo amplifiers that perform like traditional guitar amps—while providing the increased versatility of modern amplifiers. From the 200-watt Catalyst 200, capable of holding its own on nearly any stage, to the 60-watt Catalyst 60, which is perfect for practice, recording, and performing in small venues—there’s a Catalyst amp for every player. Catalyst amplifiers offer six Original Amp Designs—ranging from pristine clean to modern high-gain—crafted using our renowned HX® sound design techniques to ensure exceptional tone and feel. These powerful and sturdily constructed combos are equally suited for stage or studio use, and feature an XLR line output and a 4-channel USB recording interface. Also included are Boost circuits customized for each amp type, a dedicated Reverb section with six reverb types, 18 additional effects, an effects loop, a Power Amp input for using Catalyst as a powered speaker, MIDI capabilities, and power attenuation options for playing at any volume. The free Catalyst Edit app for desktop and mobile devices provides deep editing capabilities. Add an optional LFS2 footswitch for even more flexibility, and an optional cover to protect your combo.
Designed for electric and electric-acostic guitarists, Line 6's Catalyst is a combo amplifier that offers six original amplifier designs from sparkling clean to blistering high gain. Catalyst features a familiar 2-channel control-panel layout and analog-style controls that allow you to dial up a great sound in seconds. Catalyst amplifiers offer 24 onboard effects, an FX loop, a power-amp input, a power level control, an XLR output, and a USB connection for deep editing or recording.
This amplifier is perfect for the guitarist who needs to consider every scenario in the studio, at rehearsal, and on the stage. The top panel features a variety of controls including Boost, Gain, EQ (3 band), Presence, Channel Volume, Effect Level, Reverb Level, and Master Volume. The rear panel provides an assortment of audio and control I/O including USB Type-B, footswitch, a 3.5mm aux input, a 1/4" headphone output, effects loop (send and return), ground lift, direct output, an output power control knob, which offers 100%, 50%, 1/2W, and Mute for recording or using just the headphone output for quiet practice sessions.
Features:
- •200-watt, dual-channel 2x12 combo amp (with optional LFS2 footswitch)
- •Catalyst 200 operates like a traditional amp - but provides increased versatility
- •6 Original Amp Designs - pristine clean to modern high-gain
- •Dedicated Boost and Reverb sections (6 reverb types), 18 Effects (3 types)
- •Power attenuator (half power, 0.5 watts, Mute) for reduced volume
- •XLR line output for pro connection to P.A. or recording devices
- •Effects loop and Power Amp input for integrating external devices
- •MIDI In via DIN connector or USB
- •4-channel audio interface, MIDI, and Mac®/iOS®/PC/Android TM connectivity via USB
- •Free Catalyst Edit app for desktop and mobile devices
Line 6 CATALYST 200 Specs
| Amplifier Type | Modeling |
| Output Power | 200 W RMS |
| Channels | 2 |
| Master Volume | Yes |
| Tone Section | Bass, Channel Volume, Gain, Mid, Presence, Treble |
| EQ | 3-Band Semi-Parametric |
| Built-In Effects | Delay, Harmonizer, Modulation, Octave, Reverb |
| Presets & Storage | User Presets: 12 |
| Effects Loop | Yes |
| Inputs | 1 x 1/4" Mono Instrument 1 x 1/8" Stereo Line Level 1 x 1/4" Mono Footswitch |
| Outputs | 1 x 1/4" Stereo Headphone 1 x XLR Mono DI |
| USB | 1 x USB-B Female (Host Connection, Preset Save/Load, Update) |
| Wireless Connectivity | None |
| Configuration | 2 x 12" Speaker |
| Cabinet Type | Straight Closed Mono |
| AC Input Power | 100 to 240 VAC, 50 / 60 Hz |
| Power Consumption | 300 W (Maximum) |
| Dimensions (WxHxD) | 27.3 x 10.2 x 18.8" / 69.4 x 26.0 x 47.8 cm Combo |
| Weight | 41.7 lb / 18.9 kg Combo |
| Package Weight | 53.3 lb |
| Box Dimensions (LxWxH) | 31 x 23 x 13.75" |
UPC: 614252321792
In accordance with California labeling requirements:
WARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov
$399.99
Line 6 Catalyst 60 Guitar Amp
Line 6 Catalyst 60 Guitar Amp
CATALYST AMPLIFIERS
Original Amp Designs
The Catalyst® family includes three dual-channel combo amplifiers that perform like traditional guitar amps—while providing the increased versatility of modern amplifiers. From the 200-watt Catalyst 200, capable of holding its own on nearly any stage, to the 60-watt Catalyst 60, which is perfect for practice, recording, and performing in small venues—there’s a Catalyst amp for every player. Catalyst amplifiers offer six Original Amp Designs—ranging from pristine clean to modern high-gain—crafted using our renowned HX® sound design techniques to ensure exceptional tone and feel. These powerful and sturdily constructed combos are equally suited for stage or studio use, and feature an XLR line output and a 4-channel USB recording interface. Also included are Boost circuits customized for each amp type, a dedicated Reverb section with six reverb types, 18 additional effects, an effects loop, a Power Amp input for using Catalyst as a powered speaker, MIDI capabilities, and power attenuation options for playing at any volume. The free Catalyst Edit app for desktop and mobile devices provides deep editing capabilities. Add an optional LFS2 footswitch for even more flexibility, and an optional cover to protect your combo.
Designed for electric and electric-acostic guitarists, Line 6's Catalyst is a combo amplifier that offers six original amplifier designs from sparkling clean to blistering high gain. Catalyst features a familiar 2-channel control-panel layout and analog-style controls that allow you to dial up a great sound in seconds. Catalyst amplifiers offer 24 onboard effects, an FX loop, a power-amp input, a power level control, an XLR output, and a USB connection for deep editing or recording.
This amplifier is perfect for the guitarist who needs to consider every scenario in the studio, at rehearsal, and on the stage. The top panel features a variety of controls including Boost, Gain, EQ (3 band), Presence, Channel Volume, Effect Level, Reverb Level, and Master Volume. The rear panel provides an assortment of audio and control I/O including USB Type-B, footswitch, a 3.5mm aux input, a 1/4" headphone output, effects loop (send and return), ground lift, direct output, an output power control knob, which offers 100%, 50%, 1/2W, and Mute for recording or using just the headphone output for quiet practice sessions.
Features:
- •60-watt, dual-channel 1x12 combo amp (with optional LFS2 footswitch)
- •Catalyst 60 operates like a traditional amp - but provides increased versatility
- •6 Original Amp Designs - pristine clean to modern high-gain
- •Dedicated Boost and Reverb sections (6 reverb types), 18 Effects (3 types)
- •Power attenuator (half power, 0.5 watts, Mute) for reduced volume
- •XLR line output for pro connection to P.A. or recording devices
- •Effects loop and Power Amp input for integrating external devices
- •MIDI In via USB
- •4-channel audio interface, MIDI, and Mac®/iOS®/PC/Android TM connectivity via USB
Line 6 CATALYST 60 Specs
| Amplifier Type | Modeling |
| Output Power | 60 W RMS |
| Channels | 2 |
| Master Volume | Yes |
| Tone Section | Bass, Channel Volume, Gain, Mid, Presence, Treble |
| EQ | 3-Band Semi-Parametric |
| Built-In Effects | Delay, Harmonizer, Modulation, Octave, Reverb |
| Presets & Storage | User Presets: 12 |
| Effects Loop | Yes |
| Inputs | 1 x 1/4" Mono Instrument 1 x 1/8" Stereo Line Level 1 x 1/4" Mono Footswitch |
| Outputs | 1 x 1/4" Stereo Headphone 1 x XLR Mono DI |
| USB | 1 x USB-B Female (Host Connection, Preset Save/Load, Update) |
| Wireless Connectivity | None |
| Configuration | 1 x 12" Speaker |
| Cabinet Type | Straight Closed Mono |
| AC Input Power | 100 to 240 VAC, 50 / 60 Hz |
| Power Consumption | 85 W (Maximum) |
| Dimensions (WxHxD) | 19.9 x 17.5 x 10.2" / 50.5 x 44.4 x 26.0 cm Combo |
| Weight | 26.0 lb / 11.8 kg Combo |
| Package Weight | 34.7 lb |
| Box Dimensions (LxWxH) | 25.8 x 23.1 x 14.1" |
UPC: 614252320337
In accordance with California labeling requirements:
WARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov
$249.99
Line 6 Firehawk 1500 Full Range Stage Amp
Line 6 Firehawk 1500 Full Range Stage Amp
THE ULTIMATE STAGE AMP
Built for gigging guitarists.
They built Firehawk 1500 with total flexibility to meet the needs of performing guitarists. 1500 watts of pure power delivers enough volume to be heard on the loudest stages, while providing enough control so you can use your highest gain sounds on the quietest stages. Firehawk sounds amazing with both acoustic and electric guitars—so there’s no need for a separate acoustic amp. A full collection of ins and outs gives you all the connections you need. Use it as a stage monitor, in place of an ISO cab, or as a full-range amplification system for your pedal board or multi-effect.
LIMITLESS TONES
A massive arsenal of HD amps, cabs, and effects.
Firehawk 1500 comes loaded with DSP, so you can create elaborate signal chains and custom presets. Delve into the largest collection of premium HD amp modeling, HD effects modeling and HD cab modeling in the Line 6 family. Choose from over 200 world-class guitar amp models and effects—including 50 HD models, classic POD and XT models, and more. And if that’s not enough, you can access 128 onboard presets designed by artists and Line 6 pros, or unlimited tones in the cloud via the Firehawk Remote app editor. So go ahead—create something truly original that’ll blow your audience away.
6-SPEAKER STEREO AMPLIFICATION
Accurate tone at any volume.
Featuring a full-range, flat-response 6-speaker amplification system, Firehawk 1500 delivers accurate tone reproduction in true stereo, mono or wet/dry/wet at any volume. The unique speaker configuration in Firehawk 1500 allows for a variety of mono or stereo setups – so you’ll hear your modeled tones and effects with crystal clarity. Plus, the speakers project a wide coverage angle—far greater than a typical combo amp—so everyone in the venue will hear the same tone you sculpted to perfection.
FIREHAWK REMOTE APP EDITOR
Get the right sound faster than ever.
The Firehawk Remote iOS app and Android™ app provides a streamlined and modern graphic user interface that lets you control every aspect of your tone, craft elaborate signal chains, fine-tune hundreds of effects parameters, and more—all from your phone or tablet. Access a massive tone cloud and get the sounds you need in an instant. With Line 6 tone matching, you can match the guitar tone of any song in your music library—it's like have your own personal tone librarian. And did we mention it’s Bluetooth® enabled? Connect and stream your favorite songs at high volume.
ROCK-SOLID BUILD QUALITY
Finally, an amp that won’t let you down.
After a long gig, you want to throw your gear in the van and hit the road. Amplifiers get stacked, rattled, and knocked around—not great for a fragile tube amp. They built Firehawk 1500 with a solid wood enclosure, so it’ll always be ready for your next gig. After all, it’s a guitar amp—not a museum piece.
Firehawk 1500
- 50Hz- 20kHz Frequency Response
- 132dBSPL Max @ 1m
- 90° Horizontal coverage
- 60° Vertical coverage
- 1" with waveguide HF compression driver
- 5.5" Stereo coaxial drivers
- 12" LF woofer
- HF- center (Amp): Class AB (Type), 153W (Peak), 80W sine continuous @1% THD (RMS)
- MF + HF - stereo (Amp): Class D (Type), 2 x 153W (Peak), 2x80W sine continuous @1% THD (RMS)
- LF (Amp): Class D (Type), 1200W (Peak), 440W sine continuous @1% THD (RMS)
- Monitor inputs (0- +20dB): XLR/ 1/4" Combi, balanced – 20k ohm – 13dBu
- FX returns: 1/4" TS – 10k ohm – 7dBu
- Guitar input: 1/4" TS – 1M ohm – 12dBu
- Fx sends: 1/4" TS - 680 ohm/2.74k ohm (line/stomp) - 6dBu (stomp mode), 19dBu (line)
- Main XLR outputs: XLR, balanced – 680 ohm – 6dBu
- Headphone outputs: 1/4" TRS – 47.5 ohm – 6dBu
- 5- pin DIN Midi I/O
- Ethercon (Variax)
- RJ 45 (FBV 3)
- USB- B
- IEC power connector, 100-240VAC, 50/60 Hz
- 15mm- 32mm plywood, braced, ported enclosure
- L 661.5*W288 *H505mm (not including handle)
L 26.04”*W11.34”*H19.88” - 28.95 kg (63.14 lbs)
Firehawk Remote
- Create, save and recall unlimited presets in the cloud
- Search a cloud-based library of thousands of tones
- Remotely control amp parameters to dial in your sound
- Share tones via Twitter and Facebook
- Made for iPhone® 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPhone 4s, iPhone 4, iPad® (3rd and 4th generation), iPad 2, iPad mini and iPod touch® (5th generation) and compatible Android devices running OS v4.2 or better (visit Line6.com/android for details)
Line 6 Powercab 112 Active Speaker System
Line 6 Powercab 112 Active Speaker System
Active Stereo Guitar Speaker System | Premier Amplification For Modelers
The Powercab 112 active speaker system was specifically designed for use with modelers. Your amplification and speaker system is responsible for at least half of your tone and also determines how your modeling rig feels and responds to your playing—so why play through anything incapable of making your modeler sound as true to your intended tone as possible?
DESIGNED FOR GUITARISTS - INSIDE AND OUT
The Powercab 112 guitar speaker system for modelers looks, sounds, and responds like a professional guitar amplifier, because that is essentially what it is. In Flat Mode, Powercab 112 delivers a neutral frequency response from 70Hz to 20kHz with plenty of headroom. There is no need to adjust your modeler’s settings—your presets will sound just the way you expect them to. But what most clearly differentiates the Powercab 112 from other products is Speaker Modeling.
SPEAKER MODELING
The sound of great amplifiers is due to the speaker as much as from the other components, yet until now no one has modeled an actual speaker driver alone, independently from the cabinet it happens to be loaded into. Line 6 has done just that by creating models of six classic and boutique speakers which drive a custom-designed hybrid coaxial loudspeaker. A lightweight cone and high-temperature 2" voice coil deliver the punch and dynamic response you expect from a guitar speaker, along with the wide range of a P.A. speaker. This design adds unparalleled authenticity to the speaker models, and consequently the sound of your amp modeler, preamp, or even your stompbox amp-simulator.
BUILT FOR GIGGING
The Powercab 112 features a highly efficient 250-watt power amplifier capable of producing up to 125dB Peak SPL—enough volume to fill a small club or medium-sized venue. And Powercab 112 is constructed to withstand the rigors of the road, while also being compact and weighing a mere 35 pounds (16 kgs). There’s also an XLR output featuring optimized microphone emulation for direct connection to a P.A., and foldout kickstands facilitate angled backline placement or use as an angled floor monitor.
THE CONSUMMATE CAB FOR HELIX
Although Powercab 112 Plus was engineered to deliver superb results with any modeler, it is the perfect sonic complement to Line 6 Helix® guitar processors, completing the chain—from guitar input to guitar speaker.
Features of the Powercab 112 include:
• 1 Combination Input Jack
• 250-watt amplifier delivers up to 125dB Peak SPL
• 70Hz-20kHz neutral frequency response in Flat mode
• 12" custom hybrid coaxial driver
• Rugged-yet-lightweight plywood cabinet with flip-out kickstands
• Curved plywood construction results in a cabinet that is solid yet lightweight
• 6 Speaker Emulations
• Choice of Flat (FRFR) or Speaker Modeling modes
• Does not include L6 Link/AES/EBU, USB audio interface, presets, display, impulse response support or MIDI I/O
- Weight, Dimensions, and Manufacturer Part Numbers
- Weight: 36 lbs
- Dimensions: 18.2 x 2.3. x 12 in
- Manufacturer Part Number (MPN): 99-010-7005
- UPC: 6614252306584
In accordance with California labeling requirements:
WARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov
$649.99
Line 6 Powercab 112 Plus Active Speaker System
Line 6 Powercab 112 Plus Active Speaker System
POWERCAB® 112 PLUS
The Powercab 112 Plus guitar speaker system for modelers looks, sounds, and responds like a professional guitar amplifier, because that is essentially what it is. In Flat Mode, Powercab 112 Plus delivers a neutral frequency response from 70Hz to 20kHz with plenty of headroom. There is no need to adjust your modeler’s settings—your presets will sound just the way you expect them to. But what most clearly differentiates the Powercab 112 Plus from other products is Speaker Modeling.
DESIGNED FOR GUITARISTS - INSIDE AND OUT
The Powercab 112 Plus guitar speaker system for modelers looks, sounds, and responds like a professional guitar amplifier, because that is essentially what it is. In Flat Mode, Powercab 112 delivers a neutral frequency response from 70Hz to 20kHz with plenty of headroom. There is no need to adjust your modeler’s settings—your presets will sound just the way you expect them to. But what most clearly differentiates the Powercab 112 from other products is Speaker Modeling.
SPEAKER MODELING
The sound of great amplifiers is due to the speaker as much as from the other components, yet until now no one has modeled an actual speaker driver alone, independently from the cabinet it happens to be loaded into. Line 6 has done just that by creating models of six classic and boutique speakers which drive a custom-designed hybrid coaxial loudspeaker. A lightweight cone and high-temperature 2" voice coil deliver the punch and dynamic response you expect from a guitar speaker, along with the wide range of a P.A. speaker. This design adds unparalleled authenticity to the speaker models, and consequently the sound of your amp modeler, preamp, or even your stompbox amp-simulator.
BUILT FOR GIGGING
The Powercab 112 Plus features a highly efficient 250-watt power amplifier capable of producing up to 125dB Peak SPL—enough volume to fill a small club or medium-sized venue. And Powercab 112 Plus is constructed to withstand the rigors of the road, while also being compact and weighing a mere 36 pounds (16 kgs). There’s also an XLR output featuring optimized microphone emulation for direct connection to a P.A., and foldout kickstands facilitate angled backline placement or use as an angled floor monitor.
USER IMPULSE RESPONSE (IR) PROCESSING
Powercab 112 Plus can load and store up to 128 third-party Impulse Responses, recallable as MIDI-controlled presets. These can then be customized using the free Powercab Edit software for macOS® and Windows®, available at line6.com/software.
DIGITAL CONNECTIVITY
Powercab 112 Plus features AES/EBU connectivity. Connecting it to any modeler equipped with AES/EBU capabilities reduces both latency and noise levels by avoiding the necessity of digital to analog conversion. There’s also a L6 LINK port for connecting Powercab 112 Plus directly to Helix® modelers.
THE CONSUMMATE CAB FOR HELIX
Although Powercab 112 Plus was engineered to deliver superb results with any modeler, it is the perfect sonic complement to Line 6 Helix® guitar processors, completing the chain—from guitar input to guitar speaker.
FEATURES:
- Rugged-yet-lightweight plywood cabinet with flip-out kickstands
- 2-inch LCD
- 128 user preset locations
- XLR direct output
- MIDI In/Out
- AES/EBU and L6 LINK™ I/O
- Multipurpose second input
- USB audio interface
- Choice of Flat (FRFR) or Speaker Modeling modes
- Choice of 12 onboard Speaker Models
- Impulse response (IR) loading
- Stereo Width control for extended stereo field
- 250-watt amplifier delivers up to 125dB Peak SPL
- 12" custom hybrid coaxial driver
- 70Hz-20kHz neutral frequency response in Flat mode
- Curved plywood construction results in a cabinet that is solid yet lightweight
- 128 Presets configurable for Flat, Speaker Modeling, or IR mode
- *Third-party IRs may also be loaded and saved within presets
- Weight, Dimensions, and Manufacturer Part Numbers
- Weight: 38 lbs
- Dimensions: 18.2 x 2.3. x 12 in
- Manufacturer Part Number (MPN): 99-010-7105
- UPC: 614252306669
In accordance with California labeling requirements:
WARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov
$849.99
Line 6 Spider V 120 MkII Guitar Amplifier with Modeling
Line 6 Spider V 120 MkII Guitar Amplifier with Modeling
Line 6 Spider V 120 MkII Combo Amp
Step onstage or into the studio with an amp that can deliver almost any tone your music demands. Whether you like to plug in and rock a traditional amp tone, or enjoy tweaking parameters until you’ve devised an absolutely unique and awe-inspiring sound, the Line 6 Spider V 120 MkII amp gives you the tools to create exactly what you want. Classic Speaker mode provides an organic sound and feel, while updated presets—including vintage amp presets voiced by a renowned tube-amp maker, and Artist and Iconic Song collections—provide you with authentic building blocks from which to craft your sound into raging metal, ambient landscapes, chiming pop, or virtually anything you can conjure up. Whatever drives your creativity, the Spider V 120 MkII amp gets you there with all the ease or complexity that defines your personal musical mantra. Never settle. Own your tone!
Classic Speaker & Full-Range Modes
The Classic Speaker mode provides more organic and authentic amp-to-speaker tones, while Full-Range Speaker mode is optimal for acoustic guitars and jam track playback.
Be More You
With 128 presets and more than 200 amps, cabinets, and effects, your perfect tone awaits, whether you’re a conventional player or a blazing iconoclast. If you want to push the envelope even further, the free Spider V Remote app is always by your side to unlock more sounds, more possibilities, and more inspiration. And it’s almost impossible to fall victim to creative shutdowns, because the Line 6 CustomTone community is a click away to provide inspiration and share presets.
Use Your Feet
The Spider V 120 MkII is optimized for use with the optional Line 6 FBVTM 3 Advanced Foot Controller, which lets you control your amps and effects without interrupting your performance. The foot controller makes it easy to jam at home and record parts into a computer, but it also ensures you can perform live like a pro.
Layer Your Lines
An onboard, 60-second looper lets you explore all the textural adventures of looping. These days, many artists incorporate looping into their creative processes and live shows, so see what stacking textures can do for your own expression.
Cut The Cable
Go wireless with no fuss. The Spider V 120 MkII includes an onboard wireless receiver, which means all you need to do is get an optional Line 6 Relay transmitter for your guitar, and you’ll be unfettered and free. Get those dance moves and stage dives ready.
Features:
- Classic Speaker mode for organic sound and feel
- Artist, Iconic Song, and classic amp presets
- 200+ amps, cabs, and effects
- Tuner, metronome, jam-along drum loops, and 60-second looper
- Built-in wireless receiver works with Line 6 Relay transmitters
- Compatible with Line 6 FBV 3 Foot Controller
- XLR direct stereo outputs for connecting to a sound system or mixer
- USB interface and free Spider V Remote app (Mac, PC, iOS, Android) Recording on Android requires Android OS 5.0+ or newer with High Performance Audio enabled.
- Weight, Dimensions, and Manufacturer Part Numbers
- Shipping Weight: 34 lbs
- Shipping Dimensions: 24 x 23 x 15 in
- Manufacturer Part Number (MPN): 99-010-0235
- UPC: 614252311991
In accordance with California labeling requirements:
WARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov
$429.99
Line 6 Spider V 20 MkII Guitar Combo Amplifier
Line 6 Spider V 20 MkII Guitar Combo Amplifier
Line 6 Spider V 20 MkII Guitar Combo Amp
Spider V 20 MkII is the perfect practice amp for any guitarist, whether playing through one of the 16 tonally diverse presets, or dialing in personalized tones with the easy-to-use controls. Each preset contains effects that can be switched in and out stompbox-style using the dedicated FX buttons on the front panel, and there's also an independent Reverb knob.
There should be no such thing as “just” a practice amp, because inspiration should never be hampered by limitations or boring sounds. The Spider® V 20 MkII amp delivers authentic and inspiring tones instantly, making it a perfect partner for running down licks, writing songs, and experimenting with cool guitar textures at home or on the road. There's even a USB interface for recording. The easy-to-use tone and effects controls also make dialing in your own tones a breeze, and if you need something more to fully express your creativity, the free Spider V Remote app enambles you to quickly access an abundance of additional sounds and tone-crafting tools. The Spider V 20 Mkll is a great amp for practicing – whether you are a beginner or a pro – but it's far more than a practice amp. Don't settle. Own your tone!
Get rocking right away
You don't have to be a pro to coax compelling tones out of the Spider V 20 MkII amp with zero hassles. Even if you're uneasy about tone construction, Artist Presets crafted by professional players have your back, and a bevy of classic amp sounds were voiced by a renowned tube-amp maker. Plus, the basic amp flavors are right in front of you on the Preset knob: Crunch, Chunk, Chime, Clean, Insane, Vibe, Acoustic, Bass, and Ambient. From there, Drive, Tone, Volume, Reverb, FX, and Master knobs offer easy ways to dial-in the tone that's just right for you.
Expand your sonic quest
If you're hearing a sound in your head that's not quite materializing using the amp's onboard controls, you can dig deeper. The free Spider V Remote app lets you tweak the onboard sounds to your heart's content, as well as unlocking more than 200 additional amps, cabs, and effects.
Constant support
The Spider V 20 MkII is always at your side to assist your tone explorations. The tap-tempo function lets you sync delay, tremolo, and other time-based effects precisely to your playing by simply tapping a button in time to the music. Tuning a bit wobbly? Use the onboard tuner to get those guitar strings ringing beautifully in pitch. Looking for inspiration or some help with new sounds? An entire community of Spider users just like yourself is online and ready to share presets and other knowledge via the Line 6 CustomTone site.
Features:
- New Classic Speaker mode for organic sound and feel
- 16 presets with 3 simultaneous effects and independent reverb
- Easy-to-use tone and effects controls
- Built-in tuner and tap-tempo function
- Edit and record on Mac, PC, iOS, and Android devices
- 200+ amps and effects available via free Spider V Remote app
- Power: 20 Watts
- Equipped with 1 x 8" speakers
- 16 Sound presets that can be changed and adjusted via Spider V Remote
- Over 200 amplifiers, speakers and effects, which can be selected using Spider V Remote
- Sounds are also available for acoustic guitar and bass
- Frequency-corrected headphone output - can also be used as a DI-Out
- Intuitive operational guidance
- Built-in tuner
- Tap Tempo function
- Micro USB port
- Free-of-charge Spider V remote app
- Improved design with new front grille fabric and buttons
- Weight, Dimensions, and Manufacturer Part Numbers
- Weight: 11 lbs
- Dimensions: 15.2 x 14.2 x 8 in
- Manufacturer Part Number (MPN): 99-010-0205
UPC: 614252311809
In accordance with California labeling requirements:
WARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov
$169.99
Line 6 Spider V 240 MkII Guitar Amplifier with Modeling
Line 6 Spider V 240 MkII Guitar Amplifier with Modeling
Rage onstage with 240-watts of bust-through-the-mix, grab-the-audience-by-the-ears tone. Or lay down tracks in a recording studio with a live band, sit right next to the engineer in the control room, or do overdubs at home. Whether you like to plug in and immediately rock a traditional amp tone, or enjoy tweaking parameters until you've devised an absolutely unique and awe-inspiring sound, the Spider V240 MkII amp gives you the tools to create exactly what you want. Classic Speaker mode provides an organic sound and feel, while all-new presets – including vintage amp presets voiced by a renowned tube-amp maker, and Artist and Iconic Song collections – provide you with authentic building blocks from which to craft your sound into raging metal, ambient landscapes, chiming pop, or virtually anything you can conjure up. Whatever drives your creativity, the Spider V 240 MkII amp gets you there with all the ease or complexity that defines your personal musical mantra. Never settle. Own your tone!
Features include:
• NEW Classic Speaker mode for organic sound and feel
• NEW Artist, Iconic Song, and classic amp presets
• 200+ amps, cabs, and effects
• Tuner, metronome, and jam-along drum loops, and 60-second looper
• Built-in wireless receiver works with Line 6 Relay® transmitters
• Compatible with Line 6 FBV™ 3 Foot Controller
• XLR direct stereo outputs for connecting to a sound system or mixer
• USB interface and free Spider V Remote app
MSRP: $769.99 (US)
MAP: $549.99 (US)
UPC: 614252312158
Manufacturer Code: 990100245
Width: 31.75"
Length: 15.75"
In accordance with California labeling requirements:
WARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov
$579.99
