Line 6 StageSource L2t Powered PA Speaker (800 Watts, 1x10")

Introduce the Line 6 StageSource L2t powered PA speaker to your live sound rig, and both your stage crew and audience will thank you. Supported by DSP-driven Smart Speaker modes designed to optimize your sound, along with L6 Link digital networking for painless PA integration, a built-in 2-channel mixer with effects, and advanced feedback suppression, this versatile speaker is a must-have for musicians, performers, and tech crews who just want to set it and forget it. Want superior sound and easy setup options for your gigs? Turn to Line 6's 800-Watt, two-way, bi-amped speaker system, the StageSource L2t.

Add a 2-Channel Mixer to the L2m and Get the L2t

Like the Line 6 StageSource L2m speaker, the L2t has a rear panel with XLR-1/4" and RCA line input jacks. In addition, the L2t adds a mixer on the side panel with two more mic/instrument inputs. Each of the two channels on the side-panel mixer gives you gain control, 3-band EQ with sweepable mid, reverb level and modulation level. Here on the side panel, you'll also find an acoustic guitar modeling control that lets you dial in more of your instrument's "body." With all these side-panel inputs, the L2t makes a perfect acoustic amplifier for a guitar/vocal setup.

Versatile Live Sound Speaker

Upping the ante for all your live sound and installation needs, the unit lets you blast your tone with the speaker stacked on the floor, pole-mounted, flown, positioned on its side as a floor monitor, used as instrument backline with Virtual Tilt-back, and so forth. The StageSource L2t works its way into your live rig seamlessly.

Smart Speaker Modes That Speak to the Room

Six DSP-based Smart Speaker modes (Reference/PA, Playback, Floor Monitor, Keyboards, Acoustic Guitar, and Electric Guitar) help you to customize the powered PA speaker to your particular performance, guaranteeing that you get accurate, awesome sound for every scenario. Find out what the StageSource L2t can do as your floor monitor, front-of-house PA, personal PA, keyboard or acoustic guitar backline, or as a high-performance electric guitar speaker system used alongside your favorite multi-FX guitar pedals.

Mix in the Box

So that you don't have to tote any more gear than is necessary, the Line 6 StageSource L2t features a robust integrated 2-channel mixer with 3-band EQ, Smart Effects, and acoustic guitar modeling. One the side panel mixer, you'll find two XLR-1/4" inputs for microphones and instruments, while the rear panel gives you a XLR-1/4" line-level input plus a stereo RCA aux input that's perfect for MP3 players and more.

Quick Setup, Easy Networking Via L6 Link

Smarter than typical powered PA speakers, Line 6 StageSource L2ts "see" each other with built-in L6 Link, and adjust Smart Speaker DSP modes automatically. Connecting multiple StageSource speakers is fast and simple, since L6 Link digital networking technology does all the work. When two or more Line 6 StageSource units enter the mix, the loudspeakers are automatically configured, their pan stereo signals and Smart Speaker modes automatically adjusted. Optical sensors, DSP, and an internal accelerometer take that auto setup a step further, optimizing the sound of your system according to speaker orientation and other crucial info detected by the StageSource L2t.

Integrated Feedback Suppression

Intelligent 12-band feedback suppression keeps your sound running smoothing, continuously analyzing audio signals, sensing problem frequencies, and adjusting levels accordingly. It's like having a dedicated engineer in the box, a go-to assistant that constantly assesses and improves your sound.

Built Like a Tank

This ruggedly constructed speaker means business, with its heavy-duty plywood enclosure with a steel grille and protective screen backing. Designed to shield the unit from all the possible dangers and impacts that come with regular use, the Line 6 StageSource L2t can weather whatever comes its way on tour, on stage, installed, and more. When you want the StageSource L2t to fly, set it free the easy way with four professional M10 suspension points with a pull-back.

Features:

10", 800-Watt, 2-way, bi-amplified loudspeaker system
DSP-driven Smart Speaker modes (Reference/PA, Playback, Floor Monitor, Keyboards, Acoustic Guitar, Electric Guitar) let you customize your live sound setup
Multi-channel mixer with 3-band EQ, Smart Effects, and acoustic guitar modeling
Multi-function design for true scalability
Multi-band feedback suppression
Onboard accelerometer and pole-mount sensors
L6 Link digital networking for multi-speaker setups
Virtual Tilt-back projects speakers output upwards in backline mode
Durable plywood enclosure with integrated M10 suspension points
Retractable handle for easy transport

Specs:

Acoustical:

System Type: 10", 2-way, bi-amplified loudspeaker system
Frequency Range (-10dB): 44Hz to 19kHz, (Reference/P.A. Speaker Mode, free-field)
Frequency Response (+/-3dB): 51Hz to 18kHz, (Reference/P.A. Speaker Mode, free-field)
Maximum SPL Output: 128dB peak @ 1 meter (unweighted, measured indoors with music program material)
Coverage Pattern (-6dB): 100 horizontal x 50 vertical
Directivity Factor (Q): 9.2 (averaged 1kHz to 16kHz)
Directivity Index (DI): 9.6dB (averaged 1kHz to 16kHz)
Crossover Frequencies: LF to HF Crossover - variable, 2.2kHz to 7.0kHz (Speaker Mode dependent)
Low-Frequency Transducer: 10" extended range woofer, 2" diameter voice coil, 4Ohm impedance
High-Frequency Transducer: 1" exit compression driver, 1.4" diameter voice coil and diaphragm, 8Ohm impedanc

Electrical - Rear Panel:

Input Types: Line-level XLR-1/4", balanced Stereo RCA, unbalanced L6 LINK XLR
Input Impedance: 100 kOhm balanced 20 kOhm balanced N/A
Max Input Levels: +20dBu +16dBV N/A
Onset of Limiting: +6dBu input (Reference/P.A. Speaker Mode, Master Level control at center-detent)
-6dBu input (Reference/P.A. Speaker Mode, Master Level control at maximum)
Output Types: Balanced Loop Thru XLR Balanced Mix Out XLR L6 LINK XLR
Output Impedances: Source-dependent 680Ohm balanced N/A
Controls: Feedback Suppression On/Off/Mode, Master Level, Speaker Mode
Indicators:
- Signal Present/Clip, Feedback Suppression On/Off/Mode, Limit, 6x Speaker Mode, L6 LINK Status

Electrical - Side Panel:

Input Type: 2x mic/instrument XLR-1/4", balanced
Input Impedance (each input): 2.63 kOhm balanced (Pad = 0dB), 23.7 kOhm balanced (Pad = 20dB)
Gain Range (each input): -infinity to +57dB (Pad = 0dB); -infinity to +37dB (Pad = 20dB)
Max Input Level: +25dBu (Gain at minimum 'on' position, 20dB pad on)
Controls: 2x Gain, 20dB Pad, LF Level, MF Freq & Level, HF Level, Mod Level, Reverb Level, Feedback Suppression On/Off/Mode, 1x Dual Mono/Stereo Link Mode, Acoustic Modeling Amount, On/Off
Indicators: 2x Signal Present/Clip, 2x Feedback Suppression On/Off/Mode, 1x Acoustic Modeling On/Off

Power Amplification and Supply:

Output Channel: HF LF
Power Amplifier Type: Class AB Class D
Peak Output Power1: 175 watts 655 watts
Power Supply Voltage Range: 100 - 240 VAC, +/- 10%, 50/60Hz , automatic voltage selection
Power Consumption: 250 watts (1/8th power)
Cooling: Digitally-controlled, variable-speed 50 mm fan
Protection: Output overcurrent, overtemperature, DC fault
1 1kHz sine wave input, 1% THD+N unweighted into the nominal load impedance, single channel driven, before the onset of limiting.

Digital Signal Processing:

Speaker Modes: Reference/P.A., Playback, Floor Monitor, Keyboards, Acoustic Guitar, Electric Guitar
On-board Effects: Reverb, Modulation, Feedback Suppression, Acoustic Modeling
Transducer Protection: Excursion limiting, thermal limiting
Digital Networking: L6 LINK intelligent speaker networking system
Sensors:
- Speaker orientation, pole sensor, power amp temperature, power supply, temperature

Mechanical:
Enclosure:

15 mm enclosure, 18 mm baffle, multi-ply hardwood, textured black paint, bass, reflex design
Floor Monitor Upward Angle: 60 using kickstands, 30 using handle
Suspension Points: M10 x 1.5 threaded inserts, qty: 4
Pullback Point: M10 x 1.5 threaded insert, qty: 1
Grille: 18-gauge perforated steel, black powder coat finish
Pole Cup: 35 mm pole cup with sensor
Dimensions (HxWxD): 23.75" (603 mm) x 12.25" (312 mm) x 12.25" (312 mm)
Weight: 39.1 lb (17.7 kg)

UPC: 614252299954

$849.99

Add to Cart

QSC K10.2 Two-Way 10" 2000W Powered Portable PA Speaker

QSC K10.2 Two-Way 10" 2000W Powered Portable PA Speaker with Integrated Speaker Processor

The QSC K.2 Series™ represents the best-inclass loudspeaker for today’s demanding audio professionals. The perfect combination of elegant design, superior audio performance, high functionality, simple and intuitive operation, and genuine QSC reliability, K.2 delivers extraordinary results for users in both portable and installed applications.

The QSC K.2 10" works in a variety of orientations and configurations for use as a main PA or stage monitor. When used as a main speaker, a pair of K10.2s is well equipped to cover an audience of up to 300.

A push button on the back of the speaker allows you to physically switch between eleven preset modes and four subwoofer preset modes for incorporating a dedicated subwoofer to extended low-end performance. The built-in DSP provides user control over mic/line and mic/inst selections, factory presets, an alignment delay for rear fills, and a 2-band parametric EQ with high- and low-shelf filters. All settings can be saved into one of five user scenes for easy recall.

Two inputs (A and B) feature combo XLR-1/4" connectors with input A offering a Mic/Line selection and input B offering Mic/Hi-Z selection, which is designed for connecting high-impedance signals such as guitars and other instruments. Additionally, channel 3 provides a 3.5mm TRS auxiliary input for connecting portable audio devices.

With independent mic and line inputs, the K10.2 is a great choice for any singer/songwriter or solo performer with an instrument. You have independent control over mic and instrument levels, while the aux input provides backing tracks or incidental music between sets.

Inputs A and B also feature XLR Thru-Outputs for daisy-chaining to additional speakers or other audio equipment. All three mono inputs are mixed to a mono signal internally and are passed-thru the Mix Out XLR connector. For a true stereo L/R operation, two K10.2s are needed with each to receive independent the left and right signals respectively.

The highly efficient 2000W Class-D amplifier powers the 10" woofer and 1.4" titanium compression driver, which provide full-range audio (56 Hz to 20 kHz) with a sound pressure level powerful enough to ensure the entire audience can hear your performance. QSC's Directivity Matched Transition (DMT) matches the coverage angle of the woofer at the crossover frequency with the horn pattern to ensure a uniform response across the coverage area (90° axisymetric). The Intrinsic Correction techniques ensure a smooth power response resulting in accurate performance in a wide range of acoustic spaces with little or no EQ. The K10.2 includes a power cord.

Features

Best in class audio performance
2000 Watt Class-D amplifier module
Intrinsic Correction™ tuning and loudspeaker management
Directivity Matched Transition™ (DMT) design provides excellent power response and consistent performance across the listening area
Refined, professional appearance looks great in any application
Rugged ABS enclosure for long life and lasting durability
Deployment in either main PA or floor monitor position
Factory Presets and savable/recallable Scenes for commonly-used application
Multi-function digital display for control and selection of loudspeaker functions including cross-over, EQ, delay and frequency contour
Dual pole cup mounts (standard and 7.5 degree down-tilt)
M10 fittings for flown applications
Optional security panel prevents unauthorized tampering of controls
Complete EASE and CAD information available online
6-Year Warranty (with product registration)

Specs:

PA Speaker

Configuration	Active 2-Way
Enclosure Type	Bass-Reflex Loudspeaker/Floor Monitor
Total Power Capacity	2000 W
Amplifier Power Rating	LF: 1800 W Peak HF: 225 W Peak
Amplifier Class	Class-D

Drivers

HF Driver	1 x 1.4" / 35.6 mm Titanium Compression Driver
LF Driver	1 x 10" / 25.4 cm Woofer

Performance

Frequency Range	50 Hz to 20 kHz -10 dB
Frequency Response	56 Hz to 20 kHz -6 dB
Maximum SPL	130 dB (Peak) 124 dB (Continuous)
Coverage Angle	90° H x 90° V

Connectivity

Audio I/O

1 x Combo XLR-1/4" TRS Female Balanced/Unbalanced Mic/Line Input
1 x Combo XLR-1/4" TRS Female Balanced/Unbalanced Line/Hi-Z Input
1 x 1/8" / 3.5 mm TRS Female Unbalanced Aux Input
2 x XLR 3-Pin Male Thru/Output
1 x XLR 3-Pin Male Mix Output

Signal Processing

Crossover	High-Pass: 80 Hz (Internal) High-Pass: 100 Hz (Internal) High-Pass: 125 Hz (Internal)
Parametric EQ	0 to -6 dB at 1 kHz to 10 kHz 0 to -6 dB at 50 Hz to 20 kHz, Q Control: 0 to 4 0 to -6 dB at 200 Hz to 20 kHz, Q Control: 0 to 4 0 to -6 dB at 100 Hz to 500 Hz
Alignment Delay	0 to 100 ms

Power

AC Input Power	Universal: 100 to 240 VAC, 50 / 60 Hz
AC Power Connector	1 x IEC Input (Locking)
Current Consumption	100 VAC: 2.1 A (1/8 Power) 120 VAC: 1.9 A (1/8 Power) 240 VAC: 1.1 A (1/8 Power)

Physical

Mounting	2 x M10 Fly Point 1 x 1.38" / 35 mm Pole Socket (Dual Angle, Bottom)
Handles	1 x Top 1 x Side
Cooling	Fan (Variable Speed)
Construction Material	ABS, Metal Grille
Certifications	CE, FCC, RoHS, UL, WEEE, as per Manufacturer
Dimensions	20.4 x 12.6 x 11.8" / 518.2 x 320 x 299.7 mm
Weight	32 lb / 14.5 kg

UPC 684284065537

$699.99

Add to Cart

Samson AURO X12DA 1000-W Active Loudspeaker

The Samson AURO X12DA 1000-W Active Loudspeaker is a good professional choice for sound reinforcement. It can be used in various environments for audio applications such as, live sound, DJ setups, rehearsals, PA systems, houses of worship and more. It features a lightweight 1,000 W Class D amplifier with digital signal processing technology that continually corrects the audio signal. It also supplies the speaker and its components with a protection circuit to prevent overheating, and has limiter LED to indicate when the amp is near the clipping point.

The AURO X12DA is built with two combo XLR and 1/4" input connectors, volume controls, mic/line switch, and 3-position EQ and HPF presets, for different applications and setups. A XLR link output allows expanded sound to additional speakers. A full metal grill protects all speaker components, and an integrated 1 3/8" speaker stand mount is provided. In addition two large ergonomic carry handles and dual-angle floor monitor position options help get the job done.

Compact, lightweight Class D active loudspeakers
Samson's R.A.M.P. DSP technology helps to protect the speaker
Master volume control with peak indicator
Two XLR-1/4" combo input channels with independent volume controls
Full metal grill protects all speaker components

Specs

Output Power

Low Frequency:
RMS Power: 400 W @ 8 ohms
Peak Power: 800 W @ 8 ohms
THD: <1%
High Frequency:
RMS Power: 100 W @ 8 ohms
Peak Power: 200 W @ 8 ohms
THD < 1 %

Transducer
Low Frequency Driver	12" (30 cm) bass transducer 2.5" (6.3 cm) voice coil
Compression Driver	High Frequency: 1.34" (34 mm) titanium compression driver, edge-wound copper voice coil

Acoustics
Frequency Response	(-3 dB) 58 Hz to 20 kHz
Maximum SPL	Peak Power: 125 dB SPL @ 1 m
Horizontal Coverage Angle	90°
Vertical Coverage Angle	60°

Electronics
Crossover Type	24 dB/oct Linkwitz-Riley
Crossover Frequency	2.3 kHz

Input / Output
Input & Output	Balanced XLR and Â¼â (6.3 mm) connectors (input 1 mic/line level, input 2 line level)
Output	Balanced XLR line output

Equalizer
HPF	Flat, 80 Hz, 120 Hz
Equalization	Flat, deep, boost

Power Supply
Power Consumption	456 W max
AC Input	3-pin IEC 250 VAC, 20 A male
Fuse	100 - 127 VAC T6.3AH / 250 V 220 - 240 VAC T3.15AH / 250 V
Mount Compatibility	Integrated 1.38" (3.5 cm) speaker stand mount
Dimensions (H x W x D)	25 x 16.5 x 13" (63 x 42 x 33 cm)
Weight	28.5 lb (12.8 kg)

$299.99

Add to Cart

Samson AURO X15DA 1000-W Active Loudspeaker

The Samson AURO X15DA 1000-W Active Loudspeaker is a good professional choice for sound reinforcement. It can be used in various environments for audio applications such as, live sound, DJ setups, rehearsals, PA systems, houses of worship and more. It features a lightweight 1,000 W Class D amplifier with digital signal processing technology that continually corrects the audio signal. It also supplies the speaker and its components with a protection circuit to prevent overheating, and has limiter LED to indicate when the amp is near the clipping point.

The AURO X15DA is built with two combo XLR and 1/4" input connectors, volume controls, mic/line switch, and 3-position EQ and HPF presets, for different applications and setups. A XLR link output allows expanded sound to additional speakers. A full metal grill protects all speaker components, and an integrated 1 3/8" speaker stand mount is provided. In addition two large ergonomic carry handles and dual-angle floor monitor position options help get the job done.

Compact, lightweight Class D active loudspeakers
Samson's R.A.M.P. DSP technology helps to protect the speaker
Master volume control with peak indicator
Two XLR-1/4" combo input channels with independent volume controls
Full metal grill protects all speaker components

Specs

Output Power

Low Frequency:
RMS Power: 400 W @ 8 ohms
Peak Power: 800 W @ 8 ohms
THD: <1%
High Frequency:
RMS Power: 100 W @ 8 ohms
Peak Power: 200 W @ 8 ohms
THD < 1 %

Transducer
Low Frequency Driver	15" (38 cm) bass transducer 3" (7.3 cm) voice coil
Compression Driver	High Frequency: 1.34" (34 mm) titanium compression driver, edge-wound copper voice coil

Acoustics
Frequency Response	(-3 dB) 55 Hz to 20 kHz
Maximum SPL	Peak Power: 125 dB SPL @ 1 m
Horizontal Coverage Angle	90°
Vertical Coverage Angle	60°

Electronics
Crossover Type	24 dB/oct Linkwitz-Riley
Crossover Frequency	2.1 kHz

Input / Output
Input & Output	Balanced XLR and Â¼â (6.3 mm) connectors (input 1 mic/line level, input 2 line level)
Output	Balanced XLR line output

Equalizer
HPF	Flat, 80 Hz, 120 Hz
Equalization	Flat, deep, boost

Power Supply
Power Consumption	456 W max
AC Input	3-pin IEC 250 VAC, 20 A male
Fuse	100 - 127 VAC T6.3AH / 250 V 220 - 240 VAC T3.15AH / 250 V
Mount Compatibility	Integrated 1.38" (3.5 cm) speaker stand mount
Dimensions (H x W x D)	31.5 x 20.5 x 16.25 (79 x 52 x 41 cm)
Weight	41.5 lb (19 kg)

$349.99

Add to Cart

Manufacturers

Categories

Specials [more]

New Products [more]

Powered Speakers

Tweets

Search

Featured [more]

Newsletter

LATEST PRODUCTS

EXTRAS

GET IN TOUCH