Behringer AMP800 MINIAMP Compact 4-Channel Headphone Amplifier

The Behringer AMP800 is an inexpensive, highly compact 4-channel headphone amplifier designed for stage or studio headphone monitoring. The unit features 8 individual headphone outputs, LED input and individual channel metering, dual balanced stereo inputs with separate balance and level control, and dedicated level knobs and input selector switches for each output channel.

Features:

Compact 4-channel studio or stage headphone amplifier with 8 headphone outputs
High headroom with extended frequency response
4 independent stereo amplifier sections
Dual stereo balanced inputs with separate level and balance controls
Accepts balanced or unbalanced inputs from professional consoles and monitor mixers or consumer CD's, MiniDiscs and other unbalanced sources
Simplified level makeup on output for 6dB unbalanced signal level decrease
6-segment LED metering for main input and individual output stages
Dual headphone outputs per channel for 8 total headphone outputs
Individual channel level control and input selection switching
Parallel Link Output for multi-unit cascading

Specs:

Number of Channels	4
Input Connections	4 x 1/4" TRS Phone (L,R Pairs), Balanced
Output Connectors	2 x 1/4" TRS Phone L,R Link, Balanced 4 x 1/4" TRS Headphone, Rear Panel 4 x 1/4" TRS Headphone, Front Panel
Maximum Output Level	+21dBm/124mW (100 Ohm load)
Function Controls	2 x A,B Input Balance Knobs 2 x A,B Input Level Knobs 4 x Individual Phones Level Knobs 4 x Channel Input Selector Switches 1 x Power Switch
Frequency Response	10 Hz - 120 kHz, -3dB
THD + N	0.007% (100 Ohm load)
Noise	<95dB, 10Hz - 20kHz @ 0dBu, A-weighted
Display	6-segment LED Bargraphs
Dimensions	9.5 x 1.9 x 4.7" (242.6 x 48 x 120mm)
Weight	1.09 lb (494 g)
Specialties	Separate Front and Rear 4-Channel Headphone Outputs Ultra-Compact Bargraph LED Metering

$69.99

Add to Cart

Samson QH4 4-Channel Headphone Amplifier

With Samson's QH4 Headphone Amplifier you can split one audio source into four individual channels . Simply route audio into the device through two 1/4" balanced inputs—or one stereo 3.5mm auxiliary TRS input—and then, through its multiple stereo 1/4" jacks, you can plug in up to four pairs of headphones, all the while manipulating the individual volume of each pair with four on-board knobs.

Features:

4-Channel Stereo Headphone Amplifier
4 Stereo 1/4" Headphone Outputs
Separate Volume Control on Each Channel
For Headphones Between 16 & 600 Ohms
2 Balanced 1/4" Input Jacks
Stereo 3.5mm Auxiliary Input & Output
Master Volume, Mute & Mono Summing
Suitable for Studios & Portable Studios

The QH4 is perfect for tracking multiple performers in a studio, podcast recording or recreational music listening. Its compact design makes the QH4 ideal for use with any studio or desktop workstation, as well as with laptops or smartphones when recording on the go.

To facilitate the connection of multiple QH4s—thereby achieving more than four headphone outputs by daisy-chaining units together—the QH4 features a stereo 3.5mm input jack and a stereo 3.5mm output jack. This high-power amplifier will work with headphones operating between 16 and 600 Ohms, and as such, is a suitable addition to your project studio, desktop workstation, or portable set up.

Stereo channels may be combined using the QH4's key feature, the Mono button, before audio is sent to headphones, allowing listeners to check for phase issues, mono compatibility or when monitoring tracks that are split left and right. The Mono button also allows you to take a split left and right feed from a stereo interview and send both tracks to each side of your headphones, ideal for quickly monitoring a split track podcast or recording.

Specs:

Frequency Response	17 Hz to 47 kHz (-3 dB)
Maximum Output	8.3 dBu, 1% THD+N, loaded 16 R
Dynamic Range	22 dB, 22 kHz, BW
Noise Floor	-114 dBu, 22 kHz BW, unweighted
Input Connectors	2 x 1/4" balanced inputs 1 x stereo 1/8" / 3.5 mm unbalanced TRS input
Output Connectors	4 x stereo 1/4" unbalanced 1 x stereo 3.5 mm unbalanced TRS output
Controls	1 x Master volume knob 1 x master mute button 1 x master mono knob 4 x Channel volume knobs
Headphone Impedance Range	16 to 600 Ohms
Power	15 VDC

UPC 809164019879

$69.99

Add to Cart

Manufacturers

Categories

Specials [more]

New Products [more]

Headphone Amplifiers

Tweets

Search

Featured [more]

Newsletter

Bestsellers

LATEST PRODUCTS

EXTRAS

GET IN TOUCH

Number of Channels	4
Input Connections	1 x 1/4" TRS Input
Output Connectors	4 x High Power 1/4" TRS Outputs
Maximum Output Level	-80dB to +10dB; 51 Ohm Impedance
Function Controls	Headphone Level, Monitor / Feed Output, Mono Switch, Monitor / Feed Mute
Frequency Response	10Hz to 50kHz
THD + N	0.002%
Noise	-98dB
Display	No
Dimensions	5.5 x 1.75 x 5.5" (140 x 44 x 140mm)
Weight	5 lbs (2.3kg)

Number of Channels	6
Input Connections	2 x Stereo 1/4" TRS Inputs (4 Total Jacks, Balanced) 1 x Stereo 1/4" TRS External Input (Unbalanced)
Output Connectors	6 x 1/4" TRS Headphone Outputs (Unbalanced)
Maximum Output Level	150mW RMS (60 Ohms) Per Channel
Function Controls	1 x Talk Button 1 x Talkback Level Control 2 x Input Level Controls (A, B) 6 x Ext In Knobs 6 x A/B Mix Knobs 6 x Headphone Level Knobs 6 x Mono Buttons 6 x Mute Buttons
Frequency Response	Inputs: 10Hz - 40kHz ±1dB Outputs: 10Hz - 70kHz ±1dB
THD + N	< 0.05%
Noise	Not Specified by Manufacturer
Display	No
Dimensions (WxHxD)	19 x 1.75 x 5.5" (483 x 44 x 140mm)
Weight	5 lbs (2.3kg)

Number of Channels	4
Input Connections	1 x 1/4" TRS Stereo Phone
Output Connectors	4 x 1/4" TRS Stereo Phone
Maximum Output Level	Not specified by Manufacturer
Function Controls	4 x Volume Control Knobs
Frequency Response	10 Hz - 30 kHz +/-3 dB
THD + N	<.005%
Noise	Not specified by Manufacturer
Display	No
Dimensions	5.65 x 4.1 x 2" (144 x 105 x 51mm)
Weight	16.5 oz (419 gm)
Controls	Separate Output Volume Controls

Number of Channels	8
Input Connectors	16 x 1/4" TRS Direct Inputs 4 x XLR Inputs 2 x 1/4" Inputs 2 x RCA Inputs
Output Connectors	8 x 1/4" Stereo Headphone Outputs 4 x 1/4" TRS Foldback Outputs
Maximum Output Level	250mW + 250mW
Function Controls	8 x Channel Level Controls 2 x Main Level Controls 8 x Mono Switches 8 x Sets of Input Selector Switches
Frequency Response	20 Hz – 50 kHz, ±3 dB (PHONES outputs, 100 mW, 32 ?) 10 Hz – 100 kHz, ±3 dB (FOLDBACK outputs)
Display	LED Indicators for Signal and Overload
Dimensions	19"x11"x1.75"
Weight	9 lbs

Manufacturers

Categories

Specials [more]

New Products [more]

Headphone Amplifiers

Behringer AMP800 MINIAMP Compact 4-Channel Headphone Amplifier

PreSonus HP4 4-Channel Headphone Distribution Amplifier

PreSonus HP60 Rack Mount 6-Channel Headphone System

Samson QH4 4-Channel Headphone Amplifier

Samson QH4 4-Channel Headphone Amplifier

Features:

Specs:

Samson S-amp 4 Channel Stereo Headphone Amplifier

Tascam MH-8 8-Channel Headphone Amplifier

Tweets

Search

Featured [more]

Newsletter

Bestsellers

LATEST PRODUCTS

EXTRAS

GET IN TOUCH