iZotope Ozone 9 Standard Complete Mastering System eLicense

This product is delivered by download. We have an excellent relationship with iZotope and should receive the license code to complete your order within 24 hours. However, if you're ordering after 6:00PM PDT weekdays or on weekends, we'll process your order the next business day.

iZotope Ozone 9 Standard Complete Mastering System eLicense

Master with machine learning

Ozone 9 helps make mastering easier with AI-powered assistive audio tools that give you an instant starting point. New source separation technology in Master Rebalance lets you correct instrument levels before starting your master, or add excitement to key sections. Have the final say in any mix with complete control of your sound.

Control lows, mids, and highs

Tame harshness in high end and bring out your low end instruments with industry-first tools like the Spectral Shaper and Low End Focus modules. Use intuitive, fluid controls to target specific regions to easily smooth out issues or create unique effects.

Match your reference track

Load your favorite reference tracks into Ozone 9, loop any section, and compare your master with a single button press. Take a snapshot of your reference with the new Match EQ module and save your favorite profiles as presets for other songs. Or, use Master Assistant to set up a custom chain based on your reference.

Tonal Balance Control

Finalize and fine-tune your master in any listening environment using target curves for different genres. Quickly fix issues where you see them by calling up Ozone's EQ against your target. Use Tonal Balance Control in your mix session and adjust gain and EQ for Nectar, Neutron, and Relay plug-ins to keep frequencies in line.

Native Instruments NKS

Put the power of Ozone into your creative process and master while making music with Maschine or Komplete Kontrol. Open Ozone on the fly and easily add professional polish while making music on your hardware using hundreds of different presets and accessible parameters mapped to your hardware controls. Add loudness, width, and EQ without touching your DAW and keep the creative juices flowing.

* NKS is a registered trademark of Native Instruments GmbH.

Ozone for Streaming

Get your music ready for primetime in today’s world of streaming audio. Set intelligent loudness targets to prevent your music from being turned down by a streaming platform with Master Assistant and Maximizer. Use CODEC Preview mode in Ozone 9 Advanced to hear your music translated to MP3 or AAC. Upload a reference track to Tonal Balance Control, Master Assistant, or EQ Match, and ensure your music stacks up against the competition. Create with confidence knowing your music will sound great in any format!

What’s in Ozone 9

NEW!

Master Rebalance

Adjust volume on drums, bass, or vocals in ANY audio track, even a bounced mix.

Master Rebalance works in real time...no need to render or bounce your tracks.
Use DAW automation to add excitement in song sections with small gain changes.
Twin spectrum meters let you see rebalanced source against the rest of your track.
Master Rebalance is available in Ozone 9 Advanced only.

NEW!

Low End Focus

Get clear and punchy low frequencies and avoid artifacts from EQ and compression. “Punchy” and “Smooth” modes let you find the right setting for percussive or sustained low end issues.

Set a Boundary region to add or remove contrast anywhere in your low end.
Use the Listen button to hear what’s being removed and avoid over-processing.
Low End Focus is available in Ozone 9 Advanced only.

IMPROVED!

Imager

Add natural stereo width to narrow mixes with an upgraded “Stereoize” mode.

NEW! Two modes for stereoize give you new flavors for widening your track.
Sculpt your image in stereo with per-band widening and narrowing.
Monitor stereo width and phase using fluid metering.
Imager is available in all editions of Ozone 9.

IMPROVED!

Equalizer

Control the finest details of your sound with fluid metering and new HUD controls.

Emulate classic analog EQs or modern digital models depending on your style.
Use Mid/Side mode to correct frequencies in the sides of your audio.
NEW! Enjoy smooth, fluid metering and a resizable window that lets you see more of your sound.
Equalizer is available in all editions of Ozone 9.

Track Referencing

Seamlessly compare your mix with a reference track at the touch of a button.

Loop specific regions of your references and load up to 16 at once into Ozone.
See your reference displayed in Ozone’s meters for easy visual comparison.
Use Master Assistant to automatically match the tone of your loaded reference tracks.

Maximizer

Make mixes LOUD while preserving dynamics with Ozone’s intelligent limiter.

Intelligent Release Control (IRC) modes react to your sound to reduce distortion and pumping
Threshold Learn mode intelligently sets loudness to a target LUFS level
True Peak detection ensures your audio doesn’t clip after export
Maximizer is available in all editions of Ozone 9

Spectral Shaper

Add instant polish and remove harshness with spectral shaping technology.

Light, Medium, and Heavy settings offer different smoothing flavors.
Shape lows, mids, and highs with adjustable boundary controls.
Listen mode lets you hear what parts of the sound you’re removing, helping you find the perfect settings.
Spectral Shaper is available in Ozone 9 Advanced only.

Dynamic EQ

Make EQ boosts and cuts that respond to the dynamics of your audio.

Make subtle boosts and cuts that occur only when frequencies are too loud or soft.
Control threshold, attack, and release along with frequency and gain.
More precise than a compressor and more subtle than a normal EQ.

Exciter

Mix and match between seven different types of distortion to add warmth and character.

Use different flavors of distortion such as Tape, Retro, or Tube.
Add different distortion modes on multiple bands to create your own unique tonal balance.

Dynamics

The mastering engineer’s most versatile tool. Tame dynamic mixes and give your tracks energy.

Compress in up to four bands, or with the Detection Filter mode.
Use Auto-release mode for a smooth, natural response.

Vintage Modules

Available in Ozone 9 Standard and Advanced

Vintage Tape

Introduce rich saturation with all the frequency coloration, distortion, and phase effects of tape.

Vintage Limiter

Glue a mix together and get loud, pumping tracks using Vintage Limiter.

Vintage EQ

Brighten your master, smooth out heavy low end, and add body to your digital recordings.

Vintage Compressor

Add colorful dynamics with compression modeled after famous mastering hardware.

Ozone Utilities

CODEC Preview

Hear how your mix sounds as an MP3 or AAC at different resolutions. Listen for any loss of audio quality and anticipate delivery issues down the line. (Available in Ozone 9 Advanced)

Dither

For when you’re ready to export, Ozone’s extensive suite of dithering options help you ensure no audible loss of audio quality. (Available in Ozone 9 Standard and Advanced)

Compare Ozone 9 Features

	Elements	Standard	Advanced
Updated metering NEW!	x	x	x
Improved performance NEW!	x	x	x
Resizable windows NEW!	x	x	x
UI Improvements NEW!	x	x	x
Ozone global presets	x	x	x
Ozone module presets	x	x	x
Track Referencing		x	x
Stand-alone app		x	x
Plug-in hosting (app only)		x	x
Sample Rate Conversion (app only)		x	x
Signal Chain IMPROVED!		x	x
Dither		x	x
Codec Preview			x
Native Instruments NKS Support NEW!
Accessible preset integration	x	x	x
Macro controls for NKS hardware	x	x	x
Master Assistant IMPROVED!
Modern Mode	x	x	x
CD & Streaming targets	x	x	x
Vintage Mode NEW!		x	x
Reference target		x	x
Loudness Targets - High, Medium, & Low		x	x
Updated Interface		x	x
Match EQ IMPROVED!
Available as module		x	x
Source & Target snapshot		x	x
Amount/smoothing controls		x	x
Set match region boundary		x	x
Save snapshots as presets		x	x
Available as plug-in			x
Master Rebalance NEW!
Available as module			x
Available as plug-in			x
Separate Drums, Vocal, & Bass			x
Real time processing			x
Spectrum meter			x
Source meter			x
Low End Focus NEW!
Available as module			x
Available as plug-in			x
Low End spectrum meter			x
Set Action Region			x
Punchy & Smooth modes			x
Gain Control			x
“Listen” mode			x
Tonal Balance Control plug-in IMPROVED!
More genre targets			x
Band solo			x
Fluid metering			x
Control Nectar, Neutron, & Ozone EQ			x
Control Relay gain			x
Import custom targets			x
Broad & Fine view mode			x
Low End Crest Factor meter			x
Maximizer
Available as module	x	x	x
Stereo Independence	x	x	x
Threshold learn	x	x	x
Threshold & ceiling link	x	x	x
Transient Emphasis	x	x	x
IRC I & II	x	x	x
IRC LL (Low Latency)		x	x
IRC III & IV		x	x
Available as plug-in			x
Imager
Available as module	x	x	x
Stereoize II NEW!	x	x	x
Stereoize I	x	x	x
Vectorscope	x	x	x
Stereo Width meter	x	x	x
Correlation meter	x	x	x
Antiphase prevention	x	x	x
Multi-band		x	x
Crossover learn		x	x
Link bands		x	x
Available as plug-in			x
Equalizer
HUD Display NEW!	x	x	x
Mid/Side Mode	x	x	x
Surgical Mode	x	x	x
Per-band filter selection	x	x	x
Available as module	x	x	x
Additional Post-EQ module		x	x
Available as plug-in			x
Vintage Modules
Vintage Limiter		x	x
Vintage Compressor		x	x
Vintage EQ		x	x
Vintage Tape		x	x
Available as plug-ins			x
Spectral Shaper
Available as module			x
Available as plug-in			x
Dynamic EQ
Available as module		x	x
Available as plug-in			x
Exciter
Available as module		x	x
Available as plug-in			x
Dynamics
Available as module		x	x
Available as plug-in			x

SYSTEM REQUIREMENTS

Operating Systems:

Mac: OS X 10.11 El Capitain–macOS 10.14 Mojave

PC: Win 7 64-bit (Latest Service Packs)–Win 10

Plugin Formats:

AAX (64-bit), AU, NKS, VST2, VST3

Supported Hosts:

Logic Pro X, Ableton Live 9–10, Pro Tools 12.8-2019, FL Studio 20, Cubase 9–10, Nuendo 10, Wavelab 9, Sound Forge Pro 13, Sound Forge Mac 3, Studio One 4, REAPER 5, Reason 10, Audition CC 2019, Premiere Pro CC 2019, MASCHINE 2, Komplete Kontrol, Bitwig Studio 3, Final Cut Pro X.

$249.00

Add to Cart

iZotope RX Post Production Suite 6 eLicense

iZotope RX Post Production Suite 6

The Electronic Music Box is an Authorized Dealer for

Full Manufacturer Warranty.

This product is delivered by download. We have an excellent relationship with iZotope and should receive the license code to complete your order within 24 hours. However, if you're ordering after 6:00PM PDT weekdays or on weekends, we'll process your order the next business day.

RX Post Production Suite 6 comes packed with industry standard tools and plug-ins to help deliver pristine, professional audio. It includes the flagship RX 9 Advanced repair suite, modern vocal editing and mixing tools like Nectar 3 and Melodyne 5 essential, and versatile mixing tools like Neutron 3 Advanced. It also includes essential, world-class reverb tools like Dialogue Match, Symphony 3D, and Stratus 3D. Helpful utility tools like Insight 2, Relay, RX Loudness Control, and Tonal Balance Control 2 round out a complete arsenal of post production power.

What's Included?

RX 9 Advanced: Designed specifically for the demanding needs of post production professionals, it features the industry standard audio repair tools used on movies and TV shows.
Dialogue Match: Transfer the EQ, reverb, and ambience profile of one dialogue recording to another for seamless audio continuity in post.
Neutron 3 Advanced: Neutron 3 brings your mixing workflow into the 21st century with tools to shape your audio and produce clear, intelligible production audio.
Nectar 3 Plus: Get your dialogue to sit in the mix with the intelligent Vocal Assistant to automatically produce dialogue-based presets, two 24-band EQs with built-in unmasking for tracks with Nectar, Neutron, and Relay plug-ins, Auto Level Mode for consistent dialogue levels, plus industry-class pitch correction with Melodyne 5 essential.
Insight 2: An extensive audio analysis and metering tool that provides you with visual information about your mix with multichannel support for Dolby Atmos 7.1.2.
RX Loudness Control: Developed specifically for post production and broadcast workflows, ensure that your audio conforms to loudness standards.
Relay: This utility plug-in allows you to control the level, panning, and stereo image of your tracks, and also enables the track to communicate with other Inter-plug-in Communication-enabled plug-ins.
Symphony 3D: Bring lush, character-filled reverb for surround and immersive formats to any post production or music project.
Stratus 3D: With more than 1,700 surround presets, up to 24-channel support, and intelligent multi-channel reverb controls, you can craft the perfect depth and dimension in your sound environments with Stratus 3D.
Tonal Balance Control 2: Make mixes that translate to any listening environment with Tonal Balance Control 2, a plug-in that helps keep music of any genre on target.
Melodyne 5 essential: Use the intuitive pitch editor in Melodyne 5 essential to get the vocal take just right, then polish it with Nectar 3 for a clean, dynamic performance.

RX 9 Advanced

Trusted by top post-production engineers to quickly and reliably deliver great audio, in version 9 we've added new features and functionality to address the most common repair problems that exist in today's post projects. Save time, and your audio, with new features like Dynamic mode in De-hum to safely remove any amount of hum and Complex mode in Ambience Match to seamlessly connect dialogue and ADR cuts.

Dialogue Match

The first tool of its kind, Dialogue Match introduces all-new iZotope reverb matching technology—developed in collaboration with Exponential Audio founder and renowned reverb expert Michael Carnes—and leverages iZotope's acclaimed ambience and EQ matching tech, allowing you to apply the sonic attributes of one recording directly onto another. In other words, Dialogue Match gives your scenes astonishing environmental and spatial continuity with just two clicks. Prepare to get more work done better and faster, and change the way you approach dialogue editing forever.

Neutron 3 Advanced

From the makers of popular audio plug-ins like RX and Ozone, Neutron 3 is designed to bring your mix workflows into the 21st century. Now with Mix Assistant, Neutron 3 is the first-ever plug-in that listens to your entire session to suggest an overall level mix to kick things off right. Create custom presets using machine learning, communicate across plug-ins in your session, bend your audio to any instrument profile with Sculptor, and automatically find and fix masking issues with the most intelligent Masking Meter on the market. It’s the easiest, most intelligent way to bring unrivalled quality and speed to your mix.

Nectar 3 Plus

Vocals, in the Mix

Get your vocals to sit in the mix with the most sophisticated set of tools designed for vocal production. From corrective to creative vocal production all the way to the final polish, Nectar 3 brings out your intended performance in isolation and in the context of the mix. Put your vocals in their place with everything you need for a clear, professional sound.

Nectar 3 Plus also includes:

Celemony Melodyne 5 Essential: Melodyne adds surgical, intuitive, and truly transparent pitch adjustment capabilities that are a GRAMMY-award winning industry standard in professional studios around the world.
RX 8 Breath Control: Breath Control detects breaths your vocal recordings and automatically suppresses them, without sacrificing the quality of your recording, saving hours of manual editing.

Insight 2 Metering Suite

Insight 2 is a core component of award-winning post-production and music studios, and it helps you achieve that pro-sound. This comprehensive metering and audio analysis plug-in is perfect for any post-production, music, or broadcast application. It is perfect for visualizing changes made during mixing and mastering, troubleshooting problematic mixes, monitoring the intelligibility of your dialogue, and ensuring compliance with broadcast loudness standards. Keep an eye as well as an ear on your mix at all times with Insight 2.

RX Loudness Control

Develop high-quality broadcast audio that conforms to global loudness specifications, all via an intuitive, easy-to-use interface. RX Loudness Control works faster than real-time to ensure your audio mixes are delivered within the appropriate loudness standards. Efficiently analyze and render your mix to comply with any of the global loudness standards, then instantly create a CSV loudness report.

Stratus 3D

Create immersive surround environments with unrivalled clarity using Stratus 3D. With up to 24-channel support, over 1,700 surround presets, and intelligent multichannel reverb controls, use Stratus 3D to get just the right amount of depth and dimension in any post-production job.

With the growing prevalence of immersive surround formats like Atmos, Auro, and beyond, there are more sonic possibilities for visual media than ever before. Stratus 3D is the perfect reverb engine for these new production formats. Aside from producing reflections with stunning clarity for up to 24-channel surround, Stratus 3D provides you with precise parameter controls to help you shape and refine the perfect spatial tone, channel by channel. Independent input, early reflection, and

Symphony 3D

iZotope's lush, colourful reverb engine gets a 24-channel upgrade in Symphony 3D, bringing rich modulation and dynamics effects to any surround music or post-production. With channel-specific Balance controls and an expanded Warp section with Compression and Overdrive modules, Symphony 3D combines the creative power of R4 and R2 Surround while pushing their capabilities even further.

Symphony 3D is Exponential Audio’s flagship reverb offering. The character reverb engine of Symphony receives 24-channel surround support, making it perfect for crafting distinct, captivating spatial effects for any multichannel music or post projects. With independent parameter modules for the Attack, Early Reflections and Tail of your reverb signal, plus channel-specific Balance controls and creative modulation and dynamics effects, no other reverb plug-in gives you this much control over your multichannel reflections.

Melodyne 5

Melodyne 5 essential perfectly rounds out Nectar 3’s vocal-production arsenal. Use the intuitive pitch editor in Melodyne 5 essential to get the vocal take just right, then polish it with Nectar 3 for a clean, dynamic performance.

System Requirements for each program

RX 9 Avanced

Operating Systems:
- Mac: macOS Mojave (10.14.6) - macOS Big Sur (11.6) Intel Macs or Apple Silicon Macs in Rosetta mode only.
- Windows: Windows 8 - Windows 10
Plugin Formats:
- AU, AAX, VST2, VST3.
- All plug-in formats are 64-bit only.
Supported Hosts:
- Pro Tools 2021, Logic Pro X, Live 11 - 10, Cubase 10.5 – 11 Nuendo 11, FL Studio 20, Studio One 4 - 5, REAPER 6, Audition CC, Premiere Pro CC.

Nectar 3, Relay, and RX 8 Breath Control

Operating Systems:
- Mac: macOS High Sierra (10.13.6) - macOS Big Sur (11.6) Intel Macs or Apple Silicon Macs in Rosetta mode only.
- Windows: Windows 7 (Latest Service Packs)–Windows 10
Plugin Formats:
- AU, AAX, VST2, VST3 All plug-in formats are 64-bit only.
Supported Hosts:
- Logic Pro, Ableton Live 9.7 - 11, Pro Tools 2021, Cubase 10.5 - 11, FL Studio 20, Studio One 5, Reason 11, REAPER 6, Bitwig Studio 3.

Melodyne 5 essential

Operating Systems:
- Mac: Intel Dual Core processor (Quad Core or better recommended), 4 GB RAM (8 GB or more recommended), macOS 10.6.8 and 10.11.x to 10.13
- Windows OS: Intel or AMD Dual Core processor (Quad Core or better recommended), 4 GB RAM (8 GB or more recommended), Windows 7, 8.1 or 10 (64-bit recommended), ASIO-compatible audio hardware
Activation: Computer-based or iLok USB dongle (2nd or 3rd generation), Melodyne 4 essential only computer-based. Internet access is required for activation

Tonal Balance 2

Operating Systems:
- Mac: OS X 10.11.6 El Capitan - macOS 11 Big Sur*
  * Intel-based Apple computers only (not yet ARM)
- PC: Windows 7 - Windows 10
Plugin Formats:
- AudioUnit, AAX, VST2, VST3
- (All plug-in formats are 64-bit only)
Supported Hosts:
- Logic Pro X, Ableton Live 9 – 10.1, Pro Tools 12.8 – 2019.12, FL Studio 20.6, Cubase 9 – 10.5, Nuendo 10, Wavelab 9, Sound Forge Pro 13, Sound Forge Mac 3, Studio One 4, REAPER 5-6, Reason 10, Audition CC 2019-2020, Premiere Pro CC 2019-2020, MASCHINE 2, Komplete Kontrol, Bitwig Studio 3.

Dialogue Match

Operating Systems:
- Mac: OS X 10.11.6 El Capitan - macOS 11 Big Sur*
  * Intel-based Apple computers only (not yet ARM)
- PC: Win 7–Win 10
Plugin Formats:
- AAX AudioSuite* (64–bit) only
Supported Hosts:
- Pro Tools 11.3.1P–Pro Tools Ultimate 2019.10
- Important Note: Dialogue Match is only available as an AudioSuite for current versions of Pro Tools for offline processing. It is not currently supported for use in Media Composer, or any host application other than Pro Tools 11 or later.

Neutron 3 Advanced

Operating Systems
- Mac: macOS Mojave (10.14.6) - macOS Big Sur (11.6) Intel Macs or Apple Silicon Macs in Rosetta mode only.
- Windows: Windows 7 (64-bit) (Latest Service Packs) - Windows 10 (64-bit)
Plug-in Formats
- AU, AAX, VST2, VST3. All formats are 64-bit only.
Supported Hosts:
- Logic Pro, Ableton Live 10 - 11, Pro Tools 2021, Cubase 10.5 -11, FL Studio 20, Studio One 5, REAPER 6, Bitwig Studio 3, Adobe Audition CC, Premiere Pro CC, Nuendo 11, Reason 11, Digital Performer 10.

RX Loudness Control

RX Loudness Control runs as a plug-in for your video or audio editing software.
Supported Operating Systems:
- Mac:OS X 10.11.6 El Capitan - macOS 11 Big Sur*
  * Intel-based Apple computers only (not yet ARM)
- Windows: 7, 8 and 10
Supported Plug-in Formats:
- Adobe Extension for Media Encoder CC, Adobe Extension for Premiere Pro CC, AudioSuite DPM & AAX
Supported Plug-In Hosts:
- Media Composer 7.0.4 and 8.3.1, Premiere Pro CC*, Pro Tools 10–12.
  
  *Although they support CC 2015, you will have to manually move the presets from the old location to the new location in order to load them. Additional host support is under development.

Insight 2

Supported Operating Systems:
- Mac:OS X 10.11.6 El Capitan - macOS 11 Big Sur*
  * Intel-based Apple computers only (not yet ARM)
- Windows: 7 - 10
Plug-in Formats
- AAX (64–bit), AU, RTAS (32–bit), VST, VST3
Supported Hosts:
- Ableton Live 9–10, Cubase 9.5-10, Digital Performer 9, FL Studio 12, Logic Pro X, Nuendo 8, Pro Tools 10–2018, Reaper 5, Reason 10, Studio One 3–4

Stratus 3D and Symphony 3D

Operating Systems:
- Mac: OS X 10.8.5 Mountain Lion–macOS 10.15 Catalina
  * Intel-based Apple computers only (not yet ARM)
- PC: Win 7–Win 10
Plugin Formats:
- AAX, AU, VST, VST3 (all formats 64–bit only)
Hardware Requirements:
- CPU: Multicore processor, 2 GHz or greater
- RAM: 4 GB or greater
- Display: 1440 x 900 or greater
Authorization:
- iLok License Manager required
- iLok 2, iLok 3, or iLok Machine License
- Exponential Audio products are not available in iZotope's Product Portal

$1,999.00

Add to Cart

izotope/izotope-digital-box-RX10-ADV-web.png

iZotope RX™ 10 Advanced Audio Repair Toolkit Elicense

RX 10 Advanced Audio Editor

This product is delivered by download. We have an excellent relationship with iZotope and should receive the license code to complete your order within 24 hours. However, if you're ordering after 6:00PM PDT weekdays or on weekends, we'll process your order the next business day.

Trusted by professional audio engineers to quickly and reliably deliver clean sound

Things break. So does audio. Recorded sound is rarely perfect—in fact, it's often in really bad shape. That's why you need RX, the industry standard for audio repair that helps restore, clean up, and improve recordings in post-production, music, and content creation.

What's New?

Text Navigation

Even if you love spectrograms as much as iZotope does, navigating long dialogue files can be time-consuming, especially when seeking specific events in a recording. Now you can see what you hear with the new Text Navigation function. It analyzes dialogue and displays a text transcription above the spectrogram that's in sync with the corresponding audio. So you can now search for specific words in an audio file and also select and edit the recording using text.

Note: This navigation feature will only be available in English for RX 10.

Multiple Speaker Detection

Are you working on a single audio track with more than one speaker? Save time navigating through the file by using Multiple Speaker Detection to help find and tag the sections of speech associated with each individual voice. This is incredibly helpful especially when different speakers require different processing.

Repair Assistant Plug-In

If you're new to audio repair, or you just want to save time, try the new Repair Assistant Plug-in, which uses machine learning to find and fix audio issues quickly without leaving your DAW. The Assistant automatically recognizes specific problems and intelligently proposes a repair chain that you can modify to your liking with easy-to-use dials. More than just an upgrade of the previous Repair Assistant, this plug-in was built from the ground up.

Upgraded Spectral Recovery

Is your recording lacking highs and lows? Was it recorded on a mobile phone or using non-studio-grade equipment? Spectral Recovery can help to bring life back to thin-sounding audio, so it matches the rest of your productions. The new version improves upon the quality of resynthesized upper frequencies and can now add missing lower frequencies, too.

De-hum Dynamic Adaptive Mode

Save time removing unwanted hum with the new Dynamic Adaptive Mode in De-hum. Get rid of hum and buzz on the fly, without having to spend time learning the noise profile of your audio. Eliminating electromagnetic interference or other complex noise that changes pitch can now be done automatically without sacrificing quality.

Other Enhancements

First Time User Experience: RX is complex. That's why they added the First Time User Experience, an interactive tour to guide you through the software.
Selection Feathering: Make smoother edits with improved Selection Feathering, which now also works in the frequency domain.
Native M1 Support: Supported on Intel Macs & Apple silicon Macs (Apple M1 chips) in Rosetta 2 and native.

Advanced Features

Dialogue Isolate

Dialogue Isolate is even more powerful in RX. The module features improved Ambience Preservation, leaving more natural sounding dialogue—even when noise reduction is pushed to drastic levels—to make sure your audience hears every word of your dialogue. It is designed to separate spoken dialogue from nonstationary background noise such as crowds, traffic, footsteps, weather, or other noise with highly variable characteristics. It can be particularly effective at increasing the level of dialogue in challenging low signal-to-noise ratio conditions.

There are two Quality settings:

Good: for fast, high-quality processing that is optimized for speed over separation
Best: the highest quality processing with fewer artifacts and better isolation at the cost of a longer processing time

You can also use the legacy Dialogue Isolate algorithm from before version 9—choose this in the settings.

De-hum

Dynamic mode in De-hum instantly removes any amount of hum, wireless ring, or interference, without artifacts or affecting the audio quality. In one pass, eliminate radio and transmitter interference, camera and generator hum, and more. In Static mode, you can target hum with a fundamental tone plus the 16 harmonic bands above it. In Dynamic mode, RX can learn and remove any amount of hum with up to 1024 dynamically variable notch filters.

Ambient Match

Ambience Match lets you match the noise floor of one recording to another recording. Fill in consistent beds of ambience under constructed sentences and ADR lines from within Pro Tools AudioSuite. No more spending hours of time manually looping sections of ambient sound under a scene with ADR and broken up sentences. Seamlessly connect dialogue and ADR cuts with real background movement and textures with Complex mode, allowing you to quickly match ambiences never before possible: ocean, wind, traffic, crowds, and more. Or, use Static mode to match stationary ambiences like a quiet room with a soft hum.

Restore Collection

Roll back an audio selection to any previous step in your History list to get the best combination of audio processing from any point in time with the brand-new Restore Selection feature. When hovering your cursor over an item in the History list with a selection made in the spectrogram, an icon appears in line with the text. Clicking this icon will restore your selection to that point in its history. This is the same as going back to that point in undo history, except only for your current selection.

Spectral Editor in Logic Pro

Spectral Editor allows Logic Pro users to put some of the most powerful iZotope processing and visualization to work—without having to toggle between Logic and the RX Audio Editor. It combines RX Spectral Repair, RX's spectrogram, and RX interactive tools that enable engineers and producers to identify and eliminate unwanted noises in Logic.

Spectral Recovery

With the increasing necessity of remote meetings, podcast interviews, and video calls, real-time audio streaming is becoming more and more prevalent. Unfortunately, audio transfer protocols over the internet compress the audio and remove high-end frequencies that aid in clarity and intelligibility. Spectral Recovery restores frequencies above 4 kHz, turning grainy dialogue audio into clear, articulate recordings.

Wow and Flutter

Physical audio recordings, such as magnetic tape and vinyl discs, inevitably fall prey to the elements as time goes by. This often results in pitch fluctuations in those physical recordings. Wow and Flutter is designed to correct pitch issues regardless of the intensity. Use Wow to fix longer, sustained pitch drift, and Flutter to correct pitch variances that occur at faster rates.

Guitar De-Noise

Guitar De-noise lets you refine your guitar recordings for maximum clarity. Manage sounds unintentionally emphasized by the effects of compression or limiting, like electrical amp noise and interference, distracting fret or string squeaks, and harsh pick attacks. With intuitive sliders for sensitivity and gain reduction, polishing guitar performances for intelligibility and authenticity is now relatively easy and transparent.

Loudness Control

Prepare your recordings for final delivery with the detailed level readings and loudness-management power of the Loudness Control module. Load preset loudness-standard targets to ensure your audio conforms to broadcast requirements, and monitor your levels using the built-in numeric and histogram readouts for integrated, short-term, and momentary loudness. Plus, resize the module to fit your display perfectly and suit your unique workflow.

Improved Batch Processor

Process several audio files in one pass with the newly overhauled Batch Processor. View pertinent metadata in your audio files prior to processing, then apply a full series of processors with the Module Chain, now accessible from within the Batch Processor interface. At the end of it all, export your files in multiple file formats and bit-depths for optimal efficiency and organization. This tool is ideal for refining hundreds of samples for custom-made sample libraries.

Variable Time

Adjust the time-stretch amount of an audio selection without altering its pitch.

Variable Pitch

Adjust the pitch of an audio selection while preserving the time and length.

Improved Music Rebalance

Identify vocals, bass, percussion, and other instruments in a mix, and adjust the gain for each element. Isolate or remove elements, or split stems for tweaking in your DAW. The results sound more transparent over the previous version, nulling to a far greater degree.

Multichannel Support

Tackle audio issues that appear in any or every surround channel up to Dolby Atmos (7.1.2).

Dialogue Contour

Using this module, you can reshape the intonation of dialogue to rescue or improve a performance in postproduction. The module utilizes pitch-correction processing tailored to speech and designed to adjust inflection, allowing you to match phrases of dialogue that would not otherwise gel.

De-rustle

The De-rustle module removes the noise or rustle generated when a lavalier microphone rubs or brushes against a person's clothing during a recording. Lav rustle can vary unpredictably over time, exhibiting a wide variety of sonic characteristics in the process (high-frequency crackling and low-frequency thuds); this module significantly ameliorates the problem.

Dialogue De-reverb

Reduce and remove unwanted reverb from dialogue clips using this algorithm trained with machine learning, optimized to separate spoken dialogue from reverberant signal content. You can use this as one more tool in the arsenal before resorting to ADR.

De-wind

This module allows you to reduce—and remove—distracting wind noise from audio, addressing primarily the low-frequency rumble that occurs when intermittent bursts of wind come into contact with a microphone diaphragm.

Dialogue Isolate

The Dialogue Isolate module is designed to separate spoken dialogue from nonstationary background noise such as crowds, traffic, footsteps, weather, and more. It is suitable for increasing the level of dialogue in challenging low signal-to-noise ratio conditions.

De-ess

The De-ess audio plug-in and module in iZotope RX 9 attenuates or reduces sibilance—the harsh high-frequency sounds that come from spoken S, F, X, SH, and soft-C sounds. Two modes for handling sibilance are provided—Classic Mode detects sibilants and attenuates them with a broadband gain envelope. Spectral Mode is more transparent, intelligent, and frequency-specific than Classic Mode. Spectral Mode only attenuates the high frequencies where sibilance is most active, leaving the lower frequencies untouched.

Mouth De-click

The Mouth De-click module has been finely tuned to detect and reduce mouth noises such as clicks and lip smacks—many listeners' worst nightmare. It's designed for use on longer audio selections, but it can be used to remove individual clicks.

Breath Control

The Breath Control module intelligently detects breath noise in dialogue or vocal recordings and suppresses them. Removing and reducing breath noise in recordings can be a time-consuming process for dialogue editors and music producers alike. Breath Control can help reduce the time spent on repetitive editing without sacrificing audio quality.

Separated Voice De-noiser

The zero-latency Voice De-noise has been designed to focus on dialogue and sung vocal treatment. Voice De-noise has an Adaptive mode that can adjust to a changing noise floor in real time, making it ideal for dialogue de-noising. Also added are optimization modes for dialogue and music. When optimized for music, Voice De-noise excels at attenuating unwanted background noise from air conditioners and street noise, and also cleans vocals in apartment recording situations.

Features

De-plosive eliminates every plosive from any dialogue track with transparency
Leveler smooths any volume inconsistencies with an automatic clip-gain envelope; leveler is optimized for dialogue using intelligent De-breath and De-ess algorithms
Instant Process tool is a one-click eraser for removing unwanted coughs, scene-interrupting sirens, and more
Module Chain can process multiple modules at once, save your customized chains as presets, and execute them all with a single click, enhancing workflow and reducing mouse clicks
Sync and integrate the RX Audio Editor with any DAW or NLE timeline using RX Connect
Corrective EQ for removing harsh high frequencies, whines, rumbles, resonances, and distortion artifacts, and for accurately homing in on any problem-frequency areas
Problem-oriented presets across several modules
Signal Generator creates accurate test tones, calibration tones for postproduction delivery specs, and bleep tones for eliminating obscenities in dialogue
Markers and regions (search) provide greater flexibility for those longer edits, with the ability to perform text-based searches of any markers, regions, and comments in the metadata of the audio
Turn flawed audio into usable material by removing noises, distortions, and more
Edit audio with visual editing techniques using precision drawing tools, such as a brush and magic wand
Salvage unusable material by filling in audio gaps instantly with Spectral Repair
Seamlessly integrates with audio- or video-editing software, both as a standalone application or plug-in
EQ Match allows for quickly learning the EQ of a source audio clip and applying that EQ curve to a target audio clip, enabling sonic balance and smooth transitions between multiple audio sources with different EQ qualities
Ambience Match for matching the environment noise of two different audio recordings
Learn the ambient noise from a source audio clip, apply it to another audio clip, and create long sections of constant ambient noise to insert under inconsistent dialogue recordings
High-quality resampling using the SRC sample-rate conversion algorithm
Reduce bit resolution for final delivery of a project without sacrificing quality with the MBIT+ Dither algorithm
Rebuild distorted audio caused by analog and digital overload, and get through projects faster with the automatic Suggest feature
Spectrum Analyzer delivers a detailed spectral display that detects peaks automatically
Adaptive Hum Removal notches out fundamental hum frequencies that may change over time, like when recording a shot in multiple locations
Nondestructive Clip Gain allows you to easily adjust and balance the volume of vocals and instrumentals
Export marker regions as files
Metadata display ID3 tags and broadcast WAV metadata like source timecode, etc.
Time-reverse audio
Updated timeline ruler that displays original recorded source timecode
Movable tabs
Full-screen support for Mac

Compare RX 10 Features

	Elements	Standard	Advanced
Standalone Audio Editor		x	x
Text Navigation New		x	x
Multiple Speaker Detection New			x
Repair Assistant Plug-in* New	x	x	x
Selection Feathering New		x	x
De-hum Dynamic Adaptive Mode* New		x	x
First-Time User Experience New		x	x
Spectral Recovery New			x
De-click*	x	x	x
Ambience Match**			x
Spectral Editor		x	x
Dialogue Isolate**			x
Dynamic De-hum*	x	x	x
Restore Selection		x	x
Expandable History List		x	x
De-clip*	x	x	x
Music Rebalance***		x	x
Voice De-noise*	x	x	x
Guitar De-noise*		x	x
Static De-hum*	x	x	x
Breath Control*		x	x
Repair Assistant		x	x
De-bleed		x	x
De-reverb*	x	x	x
De-crackle*		x	x
De-ess*		x	x
De-plosive*		x	x
Mouth De-click*		x	x
Interpolate		x	x
RX Monitor		x	x
Spectral De-noise*		x	x
RX Connect		x	x
Batch Processor		x	x
Dialogue Contour			x
Spectral Repair		x	x
Loudness Control		x	x
Wow & Flutter			x
Dialogue De-reverb			x
De-rustle**			x
De-wind			x
Center Extract			x
Deconstruct			x
Module Chain		x	x
Third-party plug-in hosting		x	x
Find similar		x	x
Fade		x	x
Module list filters		x	x
Gain		x	x
Mixing		x	x
Normalize		x	x
Signal Generator		x	x
Composite View		x	x
Spectrogram		x	x
Recording and monitoring		x	x
Phase		x	x
Variable Time		x	x
Variable Pitch		x	x
EQ		x	x
Dither		x	x
Azimuth			x
Instant Process		x	x
Resample		x	x
EQ Match			x
Surround support			x
Leveler			x

* = Available as a plug-in

** = Available as a Pro Tools AudioSuite

*** = Available as a Pro Tools AudioSuite and in Logic Pro X as an ARA 2.0 plug-in

System Requirements

Operating Systems:

Mac: macOS Catalina (10.15.7) – macOS Monterey (12.5.x) *
Windows: Windows 10 – Windows 11

*Supported on Intel Macs & Apple silicon Macs (Apple M1 chips) in Rosetta and native.

Plug-in Formats:

AU, AAX, AAX Audiosuite*, VST3, AU ARA*.

Notes

All plug-in formats are 64-bit only.
RX 10 plug-ins are not available in VST2 format.
Spectral Editor & Music Rebalance ARA plug-ins are available in Logic Pro on Intel or Apple silicon Macs (in Rosetta only).
Ambience Match, Dialogue Isolate and De-rustle plug-ins are AAX Audiosuite for Pro Tools only.
Repair Assistant plug-in available as Audiosuite only in Pro Tools and VST3 & AU formats in other DAWs.

DAWs/NLEs:

Logic Pro 10.6.3 - 10.7.x, Pro Tools 2021 - 2022, Ableton Live 11, Cubase 11 - 12, Nuendo 12, Studio One 5, Reaper 6, FL Studio 20, Audition CC 2022, Premiere Pro CC 2022.

RX Audio Editor Notes

RX 10 Elements consists of plug-ins only, the RX 10 Audio Editor application is not included with RX 10 Elements.

Plug-in Hosting

AU & VST2 plug-ins can be hosted in the RX Audio Editor application.
AU plug-in hosting is available on Intel or Apple silicon Macs (in Rosetta or native).
VST2 plug-in hosting is available on Windows, Intel Macs, or Apple silicon Macs (in Rosetta only).
VST2 plug-in hosting will be deprecated and replaced with VST3 plug-in hosting in an update to RX 10.

$1,199.00

Add to Cart

iZotope RX™ 10 Advanced Audio Repair Toolkit Elicense Upgrade

RX 10 Advanced Audio Editor Upgrade

This upgrade is available only to registered users of previous RX Advanced or RX Post Production Suite

The Electronic Music Box is an Authorized Dealer for

This product is delivered by download. We have an excellent relationship with iZotope and should receive the license code to complete your order within 24 hours. However, if you're ordering after 6:00PM PDT weekdays or on weekends, we'll process your order the next business day.

Trusted by professional audio engineers to quickly and reliably deliver clean sound

Things break. So does audio. Recorded sound is rarely perfect—in fact, it's often in really bad shape. That's why you need RX, the industry standard for audio repair that helps restore, clean up, and improve recordings in post-production, music, and content creation.

What's New?

Text Navigation

Even if you love spectrograms as much as iZotope does, navigating long dialogue files can be time-consuming, especially when seeking specific events in a recording. Now you can see what you hear with the new Text Navigation function. It analyzes dialogue and displays a text transcription above the spectrogram that's in sync with the corresponding audio. So you can now search for specific words in an audio file and also select and edit the recording using text.

Note: This navigation feature will only be available in English for RX 10.

Multiple Speaker Detection

Are you working on a single audio track with more than one speaker? Save time navigating through the file by using Multiple Speaker Detection to help find and tag the sections of speech associated with each individual voice. This is incredibly helpful especially when different speakers require different processing.

Repair Assistant Plug-In

If you're new to audio repair, or you just want to save time, try the new Repair Assistant Plug-in, which uses machine learning to find and fix audio issues quickly without leaving your DAW. The Assistant automatically recognizes specific problems and intelligently proposes a repair chain that you can modify to your liking with easy-to-use dials. More than just an upgrade of the previous Repair Assistant, this plug-in was built from the ground up.

Upgraded Spectral Recovery

Is your recording lacking highs and lows? Was it recorded on a mobile phone or using non-studio-grade equipment? Spectral Recovery can help to bring life back to thin-sounding audio, so it matches the rest of your productions. The new version improves upon the quality of resynthesized upper frequencies and can now add missing lower frequencies, too.

De-hum Dynamic Adaptive Mode

Save time removing unwanted hum with the new Dynamic Adaptive Mode in De-hum. Get rid of hum and buzz on the fly, without having to spend time learning the noise profile of your audio. Eliminating electromagnetic interference or other complex noise that changes pitch can now be done automatically without sacrificing quality.

Other Enhancements

First Time User Experience: RX is complex. That's why they added the First Time User Experience, an interactive tour to guide you through the software.
Selection Feathering: Make smoother edits with improved Selection Feathering, which now also works in the frequency domain.
Native M1 Support: Supported on Intel Macs & Apple silicon Macs (Apple M1 chips) in Rosetta 2 and native.

Advanced Features

Dialogue Isolate

Dialogue Isolate is even more powerful in RX. The module features improved Ambience Preservation, leaving more natural sounding dialogue—even when noise reduction is pushed to drastic levels—to make sure your audience hears every word of your dialogue. It is designed to separate spoken dialogue from nonstationary background noise such as crowds, traffic, footsteps, weather, or other noise with highly variable characteristics. It can be particularly effective at increasing the level of dialogue in challenging low signal-to-noise ratio conditions.

There are two Quality settings:

Good: for fast, high-quality processing that is optimized for speed over separation
Best: the highest quality processing with fewer artifacts and better isolation at the cost of a longer processing time

You can also use the legacy Dialogue Isolate algorithm from before version 9—choose this in the settings.

De-hum

Dynamic mode in De-hum instantly removes any amount of hum, wireless ring, or interference, without artifacts or affecting the audio quality. In one pass, eliminate radio and transmitter interference, camera and generator hum, and more. In Static mode, you can target hum with a fundamental tone plus the 16 harmonic bands above it. In Dynamic mode, RX can learn and remove any amount of hum with up to 1024 dynamically variable notch filters.

Ambient Match

Ambience Match lets you match the noise floor of one recording to another recording. Fill in consistent beds of ambience under constructed sentences and ADR lines from within Pro Tools AudioSuite. No more spending hours of time manually looping sections of ambient sound under a scene with ADR and broken up sentences. Seamlessly connect dialogue and ADR cuts with real background movement and textures with Complex mode, allowing you to quickly match ambiences never before possible: ocean, wind, traffic, crowds, and more. Or, use Static mode to match stationary ambiences like a quiet room with a soft hum.

Restore Collection

Roll back an audio selection to any previous step in your History list to get the best combination of audio processing from any point in time with the brand-new Restore Selection feature. When hovering your cursor over an item in the History list with a selection made in the spectrogram, an icon appears in line with the text. Clicking this icon will restore your selection to that point in its history. This is the same as going back to that point in undo history, except only for your current selection.

Spectral Editor in Logic Pro

Spectral Editor allows Logic Pro users to put some of the most powerful iZotope processing and visualization to work—without having to toggle between Logic and the RX Audio Editor. It combines RX Spectral Repair, RX's spectrogram, and RX interactive tools that enable engineers and producers to identify and eliminate unwanted noises in Logic.

Spectral Recovery

With the increasing necessity of remote meetings, podcast interviews, and video calls, real-time audio streaming is becoming more and more prevalent. Unfortunately, audio transfer protocols over the internet compress the audio and remove high-end frequencies that aid in clarity and intelligibility. Spectral Recovery restores frequencies above 4 kHz, turning grainy dialogue audio into clear, articulate recordings.

Wow and Flutter

Physical audio recordings, such as magnetic tape and vinyl discs, inevitably fall prey to the elements as time goes by. This often results in pitch fluctuations in those physical recordings. Wow and Flutter is designed to correct pitch issues regardless of the intensity. Use Wow to fix longer, sustained pitch drift, and Flutter to correct pitch variances that occur at faster rates.

Guitar De-Noise

Guitar De-noise lets you refine your guitar recordings for maximum clarity. Manage sounds unintentionally emphasized by the effects of compression or limiting, like electrical amp noise and interference, distracting fret or string squeaks, and harsh pick attacks. With intuitive sliders for sensitivity and gain reduction, polishing guitar performances for intelligibility and authenticity is now relatively easy and transparent.

Loudness Control

Prepare your recordings for final delivery with the detailed level readings and loudness-management power of the Loudness Control module. Load preset loudness-standard targets to ensure your audio conforms to broadcast requirements, and monitor your levels using the built-in numeric and histogram readouts for integrated, short-term, and momentary loudness. Plus, resize the module to fit your display perfectly and suit your unique workflow.

Improved Batch Processor

Process several audio files in one pass with the newly overhauled Batch Processor. View pertinent metadata in your audio files prior to processing, then apply a full series of processors with the Module Chain, now accessible from within the Batch Processor interface. At the end of it all, export your files in multiple file formats and bit-depths for optimal efficiency and organization. This tool is ideal for refining hundreds of samples for custom-made sample libraries.

Variable Time

Adjust the time-stretch amount of an audio selection without altering its pitch.

Variable Pitch

Adjust the pitch of an audio selection while preserving the time and length.

Improved Music Rebalance

Identify vocals, bass, percussion, and other instruments in a mix, and adjust the gain for each element. Isolate or remove elements, or split stems for tweaking in your DAW. The results sound more transparent over the previous version, nulling to a far greater degree.

Multichannel Support

Tackle audio issues that appear in any or every surround channel up to Dolby Atmos (7.1.2).

Dialogue Contour

Using this module, you can reshape the intonation of dialogue to rescue or improve a performance in postproduction. The module utilizes pitch-correction processing tailored to speech and designed to adjust inflection, allowing you to match phrases of dialogue that would not otherwise gel.

De-rustle

The De-rustle module removes the noise or rustle generated when a lavalier microphone rubs or brushes against a person's clothing during a recording. Lav rustle can vary unpredictably over time, exhibiting a wide variety of sonic characteristics in the process (high-frequency crackling and low-frequency thuds); this module significantly ameliorates the problem.

Dialogue De-reverb

Reduce and remove unwanted reverb from dialogue clips using this algorithm trained with machine learning, optimized to separate spoken dialogue from reverberant signal content. You can use this as one more tool in the arsenal before resorting to ADR.

De-wind

This module allows you to reduce—and remove—distracting wind noise from audio, addressing primarily the low-frequency rumble that occurs when intermittent bursts of wind come into contact with a microphone diaphragm.

Dialogue Isolate

The Dialogue Isolate module is designed to separate spoken dialogue from nonstationary background noise such as crowds, traffic, footsteps, weather, and more. It is suitable for increasing the level of dialogue in challenging low signal-to-noise ratio conditions.

De-ess

The De-ess audio plug-in and module in iZotope RX 9 attenuates or reduces sibilance—the harsh high-frequency sounds that come from spoken S, F, X, SH, and soft-C sounds. Two modes for handling sibilance are provided—Classic Mode detects sibilants and attenuates them with a broadband gain envelope. Spectral Mode is more transparent, intelligent, and frequency-specific than Classic Mode. Spectral Mode only attenuates the high frequencies where sibilance is most active, leaving the lower frequencies untouched.

Mouth De-click

The Mouth De-click module has been finely tuned to detect and reduce mouth noises such as clicks and lip smacks—many listeners' worst nightmare. It's designed for use on longer audio selections, but it can be used to remove individual clicks.

Breath Control

The Breath Control module intelligently detects breath noise in dialogue or vocal recordings and suppresses them. Removing and reducing breath noise in recordings can be a time-consuming process for dialogue editors and music producers alike. Breath Control can help reduce the time spent on repetitive editing without sacrificing audio quality.

Separated Voice De-noiser

The zero-latency Voice De-noise has been designed to focus on dialogue and sung vocal treatment. Voice De-noise has an Adaptive mode that can adjust to a changing noise floor in real time, making it ideal for dialogue de-noising. Also added are optimization modes for dialogue and music. When optimized for music, Voice De-noise excels at attenuating unwanted background noise from air conditioners and street noise, and also cleans vocals in apartment recording situations.

Features

De-plosive eliminates every plosive from any dialogue track with transparency
Leveler smooths any volume inconsistencies with an automatic clip-gain envelope; leveler is optimized for dialogue using intelligent De-breath and De-ess algorithms
Instant Process tool is a one-click eraser for removing unwanted coughs, scene-interrupting sirens, and more
Module Chain can process multiple modules at once, save your customized chains as presets, and execute them all with a single click, enhancing workflow and reducing mouse clicks
Sync and integrate the RX Audio Editor with any DAW or NLE timeline using RX Connect
Corrective EQ for removing harsh high frequencies, whines, rumbles, resonances, and distortion artifacts, and for accurately homing in on any problem-frequency areas
Problem-oriented presets across several modules
Signal Generator creates accurate test tones, calibration tones for postproduction delivery specs, and bleep tones for eliminating obscenities in dialogue
Markers and regions (search) provide greater flexibility for those longer edits, with the ability to perform text-based searches of any markers, regions, and comments in the metadata of the audio
Turn flawed audio into usable material by removing noises, distortions, and more
Edit audio with visual editing techniques using precision drawing tools, such as a brush and magic wand
Salvage unusable material by filling in audio gaps instantly with Spectral Repair
Seamlessly integrates with audio- or video-editing software, both as a standalone application or plug-in
EQ Match allows for quickly learning the EQ of a source audio clip and applying that EQ curve to a target audio clip, enabling sonic balance and smooth transitions between multiple audio sources with different EQ qualities
Ambience Match for matching the environment noise of two different audio recordings
Learn the ambient noise from a source audio clip, apply it to another audio clip, and create long sections of constant ambient noise to insert under inconsistent dialogue recordings
High-quality resampling using the SRC sample-rate conversion algorithm
Reduce bit resolution for final delivery of a project without sacrificing quality with the MBIT+ Dither algorithm
Rebuild distorted audio caused by analog and digital overload, and get through projects faster with the automatic Suggest feature
Spectrum Analyzer delivers a detailed spectral display that detects peaks automatically
Adaptive Hum Removal notches out fundamental hum frequencies that may change over time, like when recording a shot in multiple locations
Nondestructive Clip Gain allows you to easily adjust and balance the volume of vocals and instrumentals
Export marker regions as files
Metadata display ID3 tags and broadcast WAV metadata like source timecode, etc.
Time-reverse audio
Updated timeline ruler that displays original recorded source timecode
Movable tabs
Full-screen support for Mac

Compare RX 10 Features

	Elements	Standard	Advanced
Standalone Audio Editor		x	x
Text Navigation New		x	x
Multiple Speaker Detection New			x
Repair Assistant Plug-in* New	x	x	x
Selection Feathering New		x	x
De-hum Dynamic Adaptive Mode* New		x	x
First-Time User Experience New		x	x
Spectral Recovery New			x
De-click*	x	x	x
Ambience Match**			x
Spectral Editor		x	x
Dialogue Isolate**			x
Dynamic De-hum*	x	x	x
Restore Selection		x	x
Expandable History List		x	x
De-clip*	x	x	x
Music Rebalance***		x	x
Voice De-noise*	x	x	x
Guitar De-noise*		x	x
Static De-hum*	x	x	x
Breath Control*		x	x
Repair Assistant		x	x
De-bleed		x	x
De-reverb*	x	x	x
De-crackle*		x	x
De-ess*		x	x
De-plosive*		x	x
Mouth De-click*		x	x
Interpolate		x	x
RX Monitor		x	x
Spectral De-noise*		x	x
RX Connect		x	x
Batch Processor		x	x
Dialogue Contour			x
Spectral Repair		x	x
Loudness Control		x	x
Wow & Flutter			x
Dialogue De-reverb			x
De-rustle**			x
De-wind			x
Center Extract			x
Deconstruct			x
Module Chain		x	x
Third-party plug-in hosting		x	x
Find similar		x	x
Fade		x	x
Module list filters		x	x
Gain		x	x
Mixing		x	x
Normalize		x	x
Signal Generator		x	x
Composite View		x	x
Spectrogram		x	x
Recording and monitoring		x	x
Phase		x	x
Variable Time		x	x
Variable Pitch		x	x
EQ		x	x
Dither		x	x
Azimuth			x
Instant Process		x	x
Resample		x	x
EQ Match			x
Surround support			x
Leveler			x

* = Available as a plug-in

** = Available as a Pro Tools AudioSuite

*** = Available as a Pro Tools AudioSuite and in Logic Pro X as an ARA 2.0 plug-in

System Requirements

Operating Systems:

Mac: macOS Catalina (10.15.7) – macOS Monterey (12.5.x) *
Windows: Windows 10 – Windows 11

*Supported on Intel Macs & Apple silicon Macs (Apple M1 chips) in Rosetta and native.

Plug-in Formats:

AU, AAX, AAX Audiosuite*, VST3, AU ARA*.

Notes

All plug-in formats are 64-bit only.
RX 10 plug-ins are not available in VST2 format.
Spectral Editor & Music Rebalance ARA plug-ins are available in Logic Pro on Intel or Apple silicon Macs (in Rosetta only).
Ambience Match, Dialogue Isolate and De-rustle plug-ins are AAX Audiosuite for Pro Tools only.
Repair Assistant plug-in available as Audiosuite only in Pro Tools and VST3 & AU formats in other DAWs.

DAWs/NLEs:

Logic Pro 10.6.3 - 10.7.x, Pro Tools 2021 - 2022, Ableton Live 11, Cubase 11 - 12, Nuendo 12, Studio One 5, Reaper 6, FL Studio 20, Audition CC 2022, Premiere Pro CC 2022.

RX Audio Editor Notes

RX 10 Elements consists of plug-ins only, the RX 10 Audio Editor application is not included with RX 10 Elements.

Plug-in Hosting

AU & VST2 plug-ins can be hosted in the RX Audio Editor application.
AU plug-in hosting is available on Intel or Apple silicon Macs (in Rosetta or native).
VST2 plug-in hosting is available on Windows, Intel Macs, or Apple silicon Macs (in Rosetta only).
VST2 plug-in hosting will be deprecated and replaced with VST3 plug-in hosting in an update to RX 10.

$399.00

Add to Cart

izotope/izotope-digital-box-RX10-ELE-web.png

iZotope RX™ 10 Elements Audio Repair Toolkit Elicense

RX 10 Elements Audio Editor

This product is delivered by download. We have an excellent relationship with iZotope and should receive the license code to complete your order within 24 hours. However, if you're ordering after 6:00PM PDT weekdays or on weekends, we'll process your order the next business day.

Trusted by professional audio engineers to quickly and reliably deliver clean sound

Things break. So does audio. Recorded sound is rarely perfect—in fact, it's often in really bad shape. That's why you need RX, the industry standard for audio repair that helps restore, clean up, and improve recordings in post-production, music, and content creation.

What's New?

Repair Assistant and the New Repair Assistant Plug-In

This tool automatically detects noise, clipping, clicks and pops, and more. Simply select the audio you need to process, click on the Repair Assistant button, and let the program analyze your audio. It will offer you three options for processing (light, medium, and aggressive), and you can choose among them after auditioning each one. Next, click Render, and RX Elements will automatically fix the issue.
If you’re new to audio repair, or you just want to save time, try the new Repair Assistant Plug-In, which uses machine learning to find and fix audio issues quickly without leaving your DAW. The Assistant automatically recognizes specific problems and intelligently proposes a repair chain that you can modify to your liking with easy-to-use dials. More than just an upgrade of the previous Repair Assistant, this plug-in was built from the ground up.

Horizontal Scrolling

Horizontal scrolling is now built into the intuitive Spectrogram Display. Use the scroll gesture on your trackpad or mouse with your cursor to scroll through your audio across the X-axis for lightning-fast edits.

De-Click

Automatically identify and remove any clicks, pops, and digital impulse noises that can ruin a listening experience. Use De-click when polishing audio transfers and other recordings suffering from quality degradation, digital errors, cell-phone interference, and more with the low-latency De-click algorithm.

De-Clip

Repair digital and analog clipping artifacts. Audio clipping occurs when A/D converters are pushed too hard or magnetic tape is oversaturated. De-clip can be extremely useful for reducing distortion in recordings that were made in a single pass, such as live concerts, interviews, and any audio that cannot be rerecorded.

Voice De-noise

Restore problematic vocal recordings in real time with RX's Voice De-noise audio plug-in. Improving on the earlier Dialogue De-noise, the zero-latency Voice De-noise has an Adaptive mode that can adjust to a changing noise floor in real time, making it ideal for dialogue stem set-and-forget de-noising. When optimized for music, Voice De-noise excels at attenuating unwanted background noise from air conditioners, and street noise from sung vocals in apartment recordings.

Static De-hum

In Static De-hum mode, you can target hum with a fundamental tone and 16 harmonic bands above it. In Dynamic mode, you can learn and remove any amount of hum with up to 1024 dynamically variable notch filters.

De-reverb

Reduce some of the reverb from a recorded space with the De-reverb audio plug-in. Salvage recordings of dialogue containing too much reverb/acoustic space without needing to spend time/money on a reshoot or ADR. Take control over the amount of ambient space captured in a recording—make large cathedrals sound like small halls and make roomy vocals sound like they were recorded in a proper studio space.

Compare RX 10 Features

	Elements	Standard	Advanced
Standalone Audio Editor		x	x
Text Navigation New		x	x
Multiple Speaker Detection New			x
Repair Assistant Plug-in* New	x	x	x
Selection Feathering New		x	x
De-hum Dynamic Adaptive Mode* New		x	x
First-Time User Experience New		x	x
Spectral Recovery New			x
De-click*	x	x	x
Ambience Match**			x
Spectral Editor		x	x
Dialogue Isolate**			x
Dynamic De-hum*	x	x	x
Restore Selection		x	x
Expandable History List		x	x
De-clip*	x	x	x
Music Rebalance***		x	x
Voice De-noise*	x	x	x
Guitar De-noise*		x	x
Static De-hum*	x	x	x
Breath Control*		x	x
Repair Assistant		x	x
De-bleed		x	x
De-reverb*	x	x	x
De-crackle*		x	x
De-ess*		x	x
De-plosive*		x	x
Mouth De-click*		x	x
Interpolate		x	x
RX Monitor		x	x
Spectral De-noise*		x	x
RX Connect		x	x
Batch Processor		x	x
Dialogue Contour			x
Spectral Repair		x	x
Loudness Control		x	x
Wow & Flutter			x
Dialogue De-reverb			x
De-rustle**			x
De-wind			x
Center Extract			x
Deconstruct			x
Module Chain		x	x
Third-party plug-in hosting		x	x
Find similar		x	x
Fade		x	x
Module list filters		x	x
Gain		x	x
Mixing		x	x
Normalize		x	x
Signal Generator		x	x
Composite View		x	x
Spectrogram		x	x
Recording and monitoring		x	x
Phase		x	x
Variable Time		x	x
Variable Pitch		x	x
EQ		x	x
Dither		x	x
Azimuth			x
Instant Process		x	x
Resample		x	x
EQ Match			x
Surround support			x
Leveler			x

* = Available as a plug-in

** = Available as a Pro Tools AudioSuite

*** = Available as a Pro Tools AudioSuite and in Logic Pro X as an ARA 2.0 plug-in

System Requirements

Operating Systems:

Mac: macOS Catalina (10.15.7) – macOS Monterey (12.5.x) *
Windows: Windows 10 – Windows 11

*Supported on Intel Macs & Apple silicon Macs (Apple M1 chips) in Rosetta and native.

Plug-in Formats:

AU, AAX, AAX Audiosuite*, VST3, AU ARA*.

Notes

All plug-in formats are 64-bit only.
RX 10 plug-ins are not available in VST2 format.
Spectral Editor & Music Rebalance ARA plug-ins are available in Logic Pro on Intel or Apple silicon Macs (in Rosetta only).
Ambience Match, Dialogue Isolate and De-rustle plug-ins are AAX Audiosuite for Pro Tools only.
Repair Assistant plug-in available as Audiosuite only in Pro Tools and VST3 & AU formats in other DAWs.

DAWs/NLEs:

Logic Pro 10.6.3 - 10.7.x, Pro Tools 2021 - 2022, Ableton Live 11, Cubase 11 - 12, Nuendo 12, Studio One 5, Reaper 6, FL Studio 20, Audition CC 2022, Premiere Pro CC 2022.

RX Audio Editor Notes

RX 10 Elements consists of plug-ins only, the RX 10 Audio Editor application is not included with RX 10 Elements.

Plug-in Hosting

AU & VST2 plug-ins can be hosted in the RX Audio Editor application.
AU plug-in hosting is available on Intel or Apple silicon Macs (in Rosetta or native).
VST2 plug-in hosting is available on Windows, Intel Macs, or Apple silicon Macs (in Rosetta only).
VST2 plug-in hosting will be deprecated and replaced with VST3 plug-in hosting in an update to RX 10.

$129.00

Add to Cart

izotope/izotope-digital-box-RX10-STD-web.png

iZotope RX™ 10 Standrd Audio Repair Toolkit Elicense

RX 10 Standard Audio Editor

This product is delivered by download. We have an excellent relationship with iZotope and should receive the license code to complete your order within 24 hours. However, if you're ordering after 6:00PM PDT weekdays or on weekends, we'll process your order the next business day.

Trusted by professional audio engineers to quickly and reliably deliver clean sound

Things break. So does audio. Recorded sound is rarely perfect—in fact, it's often in really bad shape. That's why you need RX, the industry standard for audio repair that helps restore, clean up, and improve recordings in post-production, music, and content creation.

What's New?

Text Navigation

Even if you love spectrograms as much as iZotope does, navigating long dialogue files can be time-consuming, especially when seeking specific events in a recording. Now you can see what you hear with the new Text Navigation function. It analyzes dialogue and displays a text transcription above the spectrogram that's in sync with the corresponding audio. So you can now search for specific words in an audio file and also select and edit the recording using text.

Note: This navigation feature will only be available in English for RX 10.

Repair Assistant Plug-In

If you're new to audio repair, or you just want to save time, try the new Repair Assistant Plug-in, which uses machine learning to find and fix audio issues quickly without leaving your DAW. The Assistant automatically recognizes specific problems and intelligently proposes a repair chain that you can modify to your liking with easy-to-use dials. More than just an upgrade of the previous Repair Assistant, this plug-in was built from the ground up.

De-hum Dynamic Adaptive Mode

Save time removing unwanted hum with the new Dynamic Adaptive Mode in De-hum. Get rid of hum and buzz on the fly, without having to spend time learning the noise profile of your audio. Eliminating electromagnetic interference or other complex noise that changes pitch can now be done automatically without sacrificing quality.

Other Enhancements

First Time User Experience: RX is complex. That's why they added the First Time User Experience, an interactive tour to guide you through the software.
Selection Feathering: Make smoother edits with improved Selection Feathering, which now also works in the frequency domain.
Native M1 Support: Supported on Intel Macs & Apple silicon Macs (Apple M1 chips) in Rosetta 2 and native.

General Features

Restore Collection

Roll back an audio selection to any previous step in your History list to get the best combination of audio processing from any point in time with the brand-new Restore Selection feature. When hovering your cursor over an item in the History list with a selection made in the spectrogram, an icon appears in line with the text. Clicking this icon will restore your selection to that point in its history. This is the same as going back to that point in undo history, except only for your current selection.

Spectral Editor in Logic Pro

Spectral Editor allows Logic Pro users to put some of the most powerful iZotope processing and visualization to work—without having to toggle between Logic and the RX Audio Editor. It combines RX Spectral Repair, RX's spectrogram, and RX interactive tools that enable engineers and producers to identify and eliminate unwanted noises in Logic.

Guitar De-Noise

Guitar De-noise lets you refine your guitar recordings for maximum clarity. Manage sounds unintentionally emphasized by the effects of compression or limiting, like electrical amp noise and interference, distracting fret or string squeaks, and harsh pick attacks. With intuitive sliders for sensitivity and gain reduction, polishing guitar performances for intelligibility and authenticity is now relatively easy and transparent.

Loudness Control

Prepare your recordings for final delivery with the detailed level readings and loudness-management power of the Loudness Control module. Load preset loudness-standard targets to ensure your audio conforms to broadcast requirements, and monitor your levels using the built-in numeric and histogram readouts for integrated, short-term, and momentary loudness. Plus, resize the module to fit your display perfectly and suit your unique workflow.

32-Tab Limit for Audio Tabs

Time is precious when editing audio in post. To help you tackle more work faster, RX 8 doubles the previous 16-tab limit, now allowing you to view and edit up to 32 files within RX Audio Editor. Cover more ground in less time with greater efficiency and in-app real estate.

Horizontal Scrolling

Horizontal scrolling is now built into the intuitive Spectrogram Display. Use the scroll gesture on your trackpad or mouse with your cursor to scroll through your audio across the X-axis for lightning-fast edits.

Improved De-Hum

The De-hum module in RX 8 Elements uses an improved detection and reduction algorithm to automatically identify the base frequency of your unwanted hum and precisely remove it and its harmonics, ensuring a clean overall sound. For more complex hum and buzz removal, De-hum automatically recommends when to use De-noise instead, so you'll always have the best tool at hand for the job. Don't forget to use Adaptive mode to remove hum that changes in frequency over time.

Improved Batch Processor

Process several audio files in one pass with the newly overhauled Batch Processor. View pertinent metadata in your audio files prior to processing, then apply a full series of processors with the Module Chain, now accessible from within the Batch Processor interface. At the end of it all, export your files in multiple file formats and bit-depths for optimal efficiency and organization. This tool is ideal for refining hundreds of samples for custom-made sample libraries.

Improved Music Rebalance

Identify vocals, bass, percussion, and other instruments in a mix, and adjust the gain for each element. Isolate or remove elements, or split stems for tweaking in your DAW. The results sound more transparent over the previous version, nulling to a far greater degree.

Variable Time

Adjust the time-stretch amount of an audio selection without altering its pitch.

Variable Pitch

Adjust the pitch of an audio selection while preserving the time and length.

Music Rebalance

Identify vocals, bass, percussion, and other instruments in a mix, and adjust the gain for each element. Isolate or remove vocals.

Repair Assistant

Repair Assistant is an intelligent tool that detects noise, clipping, clicks, and more, allowing you to solve audio-restoration issues quickly and effectively. After analyzing any snippet of audio you select, it will provide three different options for processing, and let you make the ultimate choice.

Composite View

Composite View allows you to edit and apply processing to 32 individual audio tracks as if they were one, easily addressing audio issues that appear across multiple microphones.

De-Bleed

Working across multiple tracks, the De-bleed module reduces the leakage of one signal into another. De-bleed can help reduce or eliminate bleed from headphones, click tracks, multiple mics with small amounts of cross bleed, and even some drum bleed issues.

De-Ess

The De-ess plug-in and module attenuates or reduces sibilance (the harsh high-frequency sounds that come from S, F, X, SH, and soft-C sounds). Two modes for handling sibilance are provided. Classic Mode detects sibilants and attenuates them with a broadband gain envelope. Spectral Mode is more transparent, intelligent, and frequency-specific, and only attenuates the high frequencies where sibilance is most active, leaving the lower frequencies untouched.

Mouth De-Click

The Mouth De-click module has been finely tuned to detect and reduce mouth noises such as clicks and lip smacks—many listeners' worst nightmare. It's designed for use on longer audio selections, but it can also be used to remove individual clicks.

Breath Control

The Breath Control module intelligently detects breaths in dialogue or vocal recordings and suppresses them. Removing and reducing breaths in recordings can be a time-consuming process for dialogue editors and music producers. Breath Control can help reduce the time spent on repetitive editing without sacrificing audio quality.

Voice De-Noise

The zero-latency Voice De-noise has been designed to focus on dialogue and sung vocal treatment. Voice De-noise has an Adaptive mode that can adjust to a changing noise floor in real time, making it ideal for dialogue denoising. Also added are optimization modes for dialogue and music. When optimized for music, Voice De-noise excels at attenuating unwanted background noise from air conditioners and street noise to sung vocals in apartment recording situations.

Features

De-plosive eliminates every plosive from any dialogue track with transparency
Leveler smooths any volume inconsistencies with an automatic clip-gain envelope; leveler is optimized for dialogue using intelligent De-breath and De-ess algorithms
Instant Process tool is a one-click eraser for removing unwanted coughs, scene-interrupting sirens, etc.
Module Chain can process multiple modules at once, save your customized chains as presets, and execute them all with a single click, enhancing workflow and reducing mouse clicks
Sync and integrate the RX Audio Editor with any DAW or NLE timeline using RX Connect
Corrective EQ for removing harsh high frequencies, whines, rumbles, resonances, and distortion artifacts, and for accurately homing in on any problem frequency areas
Multiple problem-oriented presets across several modules
Signal Generator creates accurate test tones, calibration tones for postproduction delivery specs, bleep tones for eliminating obscenities in dialogue
Markers and regions (search) provide greater flexibility for those longer edits, with the ability to perform text-based searches of markers, regions, and comments in the metadata of the audio
Turn flawed audio into usable material by removing noises, distortions, and more
Edit audio with visual editing techniques using precision drawing tools, such as a brush and magic wand
Salvage unusable material by filling in audio gaps instantly with Spectral Repair
Seamlessly integrates with audio or video editing software, both as a standalone application or plug-in
EQ Match allows for quickly learning the EQ of a source audio clip and applying that EQ curve to a target audio clip, enabling sonic balance and smooth transitions between multiple audio sources with different EQ qualities
Ambience Match for matching the environment noise of two different audio recordings
Learn the ambient noise from a source audio clip and apply it to another audio clip, and create long sections of constant ambient noise to insert under inconsistent dialogue recordings
Loudness module processes whole program mixes or segments to comply with international industry standards, ensuring mixes never fail network specifications
High-quality resampling using the SRC sample-rate conversion algorithm
Reduce bit resolution for final delivery of a project without sacrificing quality with the MBIT+ Dither algorithm
Rebuild distorted audio caused by analog and digital overload and get through projects faster with the automatic Suggest feature
Spectrum Analyzer delivers a detailed spectral display that detects peaks automatically
Adaptive Hum Removal notches out fundamental hum frequencies that may change over time, like when recording a shot in multiple locations
Nondestructive Clip Gain allows for easily adjusting and balancing the volume of vocals and instrumentals
Export marker regions as files
Metadata display (ID3 tags and broadcast WAV metadata like source Timecode, etc.)
Time-reverse audio
Updated timeline ruler that displays original recorded source Timecode
Movable tabs
Full-screen support for Mac

Compare RX 10 Features

	Elements	Standard	Advanced
Standalone Audio Editor		x	x
Text Navigation New		x	x
Multiple Speaker Detection New			x
Repair Assistant Plug-in* New	x	x	x
Selection Feathering New		x	x
De-hum Dynamic Adaptive Mode* New		x	x
First-Time User Experience New		x	x
Spectral Recovery New			x
De-click*	x	x	x
Ambience Match**			x
Spectral Editor		x	x
Dialogue Isolate**			x
Dynamic De-hum*	x	x	x
Restore Selection		x	x
Expandable History List		x	x
De-clip*	x	x	x
Music Rebalance***		x	x
Voice De-noise*	x	x	x
Guitar De-noise*		x	x
Static De-hum*	x	x	x
Breath Control*		x	x
Repair Assistant		x	x
De-bleed		x	x
De-reverb*	x	x	x
De-crackle*		x	x
De-ess*		x	x
De-plosive*		x	x
Mouth De-click*		x	x
Interpolate		x	x
RX Monitor		x	x
Spectral De-noise*		x	x
RX Connect		x	x
Batch Processor		x	x
Dialogue Contour			x
Spectral Repair		x	x
Loudness Control		x	x
Wow & Flutter			x
Dialogue De-reverb			x
De-rustle**			x
De-wind			x
Center Extract			x
Deconstruct			x
Module Chain		x	x
Third-party plug-in hosting		x	x
Find similar		x	x
Fade		x	x
Module list filters		x	x
Gain		x	x
Mixing		x	x
Normalize		x	x
Signal Generator		x	x
Composite View		x	x
Spectrogram		x	x
Recording and monitoring		x	x
Phase		x	x
Variable Time		x	x
Variable Pitch		x	x
EQ		x	x
Dither		x	x
Azimuth			x
Instant Process		x	x
Resample		x	x
EQ Match			x
Surround support			x
Leveler			x

* = Available as a plug-in

** = Available as a Pro Tools AudioSuite

*** = Available as a Pro Tools AudioSuite and in Logic Pro X as an ARA 2.0 plug-in

System Requirements

Operating Systems:

Mac: macOS Catalina (10.15.7) – macOS Monterey (12.5.x) *
Windows: Windows 10 – Windows 11

*Supported on Intel Macs & Apple silicon Macs (Apple M1 chips) in Rosetta and native.

Plug-in Formats:

AU, AAX, AAX Audiosuite*, VST3, AU ARA*.

Notes

All plug-in formats are 64-bit only.
RX 10 plug-ins are not available in VST2 format.
Spectral Editor & Music Rebalance ARA plug-ins are available in Logic Pro on Intel or Apple silicon Macs (in Rosetta only).
Ambience Match, Dialogue Isolate and De-rustle plug-ins are AAX Audiosuite for Pro Tools only.
Repair Assistant plug-in available as Audiosuite only in Pro Tools and VST3 & AU formats in other DAWs.

DAWs/NLEs:

Logic Pro 10.6.3 - 10.7.x, Pro Tools 2021 - 2022, Ableton Live 11, Cubase 11 - 12, Nuendo 12, Studio One 5, Reaper 6, FL Studio 20, Audition CC 2022, Premiere Pro CC 2022.

RX Audio Editor Notes

RX 10 Elements consists of plug-ins only, the RX 10 Audio Editor application is not included with RX 10 Elements.

Plug-in Hosting

AU & VST2 plug-ins can be hosted in the RX Audio Editor application.
AU plug-in hosting is available on Intel or Apple silicon Macs (in Rosetta or native).
VST2 plug-in hosting is available on Windows, Intel Macs, or Apple silicon Macs (in Rosetta only).
VST2 plug-in hosting will be deprecated and replaced with VST3 plug-in hosting in an update to RX 10.

$399.00

Add to Cart

iZotope RX™ 11 Elements Audio Repair Toolkit Elicense

RX 11 Elements Audio Editor

This product is delivered by download. We have an excellent relationship with iZotope and should receive the license code to complete your order within 24 hours. However, if you're ordering after 6:00PM PDT weekdays or on weekends, we'll process your order the next business day.

Perfect for content creators and musicians, RX 11 Elements is an easy-to-use, intelligent noise reduction and audio repair toolkit. RX 11 Elements features six plugins for audio rescue that you can use in your favorite host: De-click, De-clip, De-hum, De-reverb, Voice De-noise, and the Repair Assistant.

RX 11 Elements features

Repair Assistant [IMPROVED]
De-click plugin
Voice De-noise plugin
De-reverb plugin
De-clip plugin
De-hum plugin

RX Plugin Comparison

Review the table below to understand which plugins you get with each edition of RX.

RX 11 Plugins	Elements	Standard	Advanced
Ambience Match			??*
Breath Control		??	??
Connect		??	??
De-click	??	??	??
De-clip	??	??	??
De-crackle		??	??
De-ess		??	??
De-hum	??	??	??
De-plosive		??	??
De-reverb	??	??	??
De-rustle			??*
Dialogue Isolate, now with Dialogue De-reverb [NEW AND IMPROVED!]		??	??
Guitar De-noise		??	??
Monitor		??	??
Mouth De-click		??	??
Music Rebalance [IMPROVED!]		??**	??**
Repair Assistant [IMPROVED!]	??	??	??
Spectral De-noise		??	??
Spectral Editor		??***	??***
Voice De-noise	??	??	??

* AAX Audiosuite only.

** Includes ARA support for Logic Pro 10.7+ on Intel or Apple silicon Macs (Rosetta only)

*** Includes ARA support for Logic Pro 10.7+ on Intel or Apple silicon Macs (Rosetta only), PreSonus Studio One 6.0 or higher, or Avid Pro Tools 2024.06 or higher

RX Audio Editor - Module Comparison

The standalone audio editor included with RX Standard and Advanced comes loaded with purpose-built modules that help you tackle a huge range of audio tasks. Review the table below to understand which modules you’ll get with each edition of RX.

RX 11 Modules	Standard	Advanced
Ambience Match		??
Azimuth		??
Breath Control	??	??
Center Extract		??
De-bleed	??	??
De-click	??	??
De-clip	??	??
De-crackle	??	??
De-ess	??	??
De-hum	??	??
De-plosive	??	??
De-reverb	??	??
De-rustle		??
De-wind		??
Deconstruct		??
Dialogue Isolate, now with Dialogue De-reverb [NEW AND IMPROVED!]	??	??†
Dialogue Contour [IMPROVED!]		??
Dither	??	??
EQ	??	??
EQ Match		??
Fade	??	??
Gain	??	??
Guitar De-noise	??	??
Interpolate	??	??
Leveler		??
Loudness Control	??	??
Loudness Optimize [NEW!]	??	??
Mixing	??	??
Mouth De-click	??	??
Music Rebalance [IMPROVED!]	??	??
Normalize	??	??
Phase	??	??
Repair Assistant [IMPROVED!]	??	??
Resample	??	??
Signal Generator [IMPROVED]	??	??
Spectral De-noise	??	??
Spectral Recovery		??
Spectral Repair	??	??
Streaming Preview [NEW!]	??	??
Time & Pitch	??	??
Variable Pitch	??	??
Variable Time	??	??
Voice De-noise	??	??
Wow & Flutter		??

† Note: The Advanced version of the Dialogue Isolate module also includes the new highest-quality offline mode and multi-band processing

RX Audio Editor - Feature Comparison

Alongside the modules, the standalone audio editor includes additional features, utilities, and capabilities for processing your audio. Review the table below to understand which features you’ll get with each edition of RX.

RX 11 Additional Features	Standard	Advanced
Batch Processor	??	??
Find Similar	??	??
Instant Process	??	??
Mid/Side Mode	??	??
Module Chain	??	??
Module List View Filters	??	??
MP3 Export	??	??
Multichannel Processing		??
Multiple Speaker Detection	??	??
Plug-in Hosting	??	??
Recording & Monitoring	??	??
Restore Selection	??	??
Spectral Editing Tools	??	??
Spectrum Analyzer	??	??
Spectrogram	??	??
Text Navigation	??	??
Time/Frequency Feathering	??	??
Waveform Statistics	??	??

System Requirements

Operating Systems:

Mac: macOS Monterey (12.7.5), macOS Ventura (13.6.7), macOS Sonoma (14.5)*
Windows: Windows 10 – Windows 11

*Supported on Intel Macs and Apple silicon M-series Macs (in native & Rosetta).

Plug-in Formats:

RX Elements Plugin Formats
AU, AAX, AAX Audiosuite, VST3.

Notes

All plugin formats are 64-bit only.
RX 11 plugins are not available in VST2 format.
Repair Assistant plugin formats: AAX Audiosuite, AU, VST3.
RX Standard & Advanced Plugin Formats: AU, AAX, AAX Audiosuite, VST3, AU ARA.
Spectral Editor & Music Rebalance AU ARA requirements: Logic Pro 10.7+ on Intel or Apple silicon Macs (Rosetta only).
Spectral Editor is available in VST3 ARA for Studio One 6 and AAX ARA for Pro Tools (via upcoming Avid update)
Ambience Match & De-rustle plugin formats: AAX Audiosuite only.
Repair Assistant plugin formats: AAX Audiosuite, AU, and VST3.
DAWs/NLEs:

Logic Pro 10.7 - Logic Pro 11, Pro Tools 2024, Ableton Live 11-12, Cubase 13, Nuendo 13, Studio One 6, Reaper 7, FL Studio 21, Adobe Audition 2024, Adobe Premiere Pro 2024, DaVinci Resolve 19

RX Audio Editor Notes

RX 11 Elements does not include the RX Audio Editor application. It is included with RX 11 Standard and Advanced only.

Plug-in Hosting

Supported plugin formats within the RX 11 Audio Editor:
Windows: VST3, VST2.
Intel Macs & Rosetta on Apple silicon Macs: AU, VST3, VST2.
Native on Apple silicon Macs: AU, VST3.

$99.00

Add to Cart

iZotope RX™ 9 Advanced Audio Repair Toolkit Elicense

RX 9 Advanced Audio Editor

This product is delivered by download. We have an excellent relationship with iZotope and should receive the license code to complete your order within 24 hours. However, if you're ordering after 6:00PM PDT weekdays or on weekends, we'll process your order the next business day.

iZotope RX 9 Advanced

The advanced edition of RX 9 offers many new and updated modules and algorithms including Dynamic De-hum, Dialogue Isolate, Ambience Match, Spectral Editor, Restore Selection, and an Expandable History List.

The dynamic mode in De-hum instantly removes any amount of hum, interference, or wireless ring without artifacts or affecting the audio quality. In one pass, eliminate radio and transmitter interference, and camera and generator hum. In static mode, you can target hum with a fundamental hum frequency plus 16 harmonic bands above it, while dynamic mode allows you to learn and remove any amount of hum with up to 1024 dynamically variable notch filters.

Extract clean dialogue from its environment without artifacts using the new algorithm, Dialogue Isolate. This module features improved ambience preservation, leaving a more natural sounding dialogue, even when noise reduction is pushed to drastic levels.

The updated complex mode in Ambience Match allows you to seamlessly connect dialogue and ADR cuts with real background movement and textures. Quickly match ambiences never before possible, such as wind, ocean, crowds, traffic, and more.

For Logic users, The Spectral Editor allows you to clean up unwanted sounds directly within Logic without having to toggle between the RX Audio Editor and Logic Pro. It combines RX Spectral Repair, RX's spectrogram, and RX interactive tools that enable engineers and producers to identify and eliminate unwanted noises, from within Logic Pro.

Restore History allows you to roll back any audio selection to a previous step in your History list to get the best combination of audio processing form any point in time. This allows you to select a point in history for only the current selection. The History list has been expanded to 30 undo steps for quick reference.

All previous modules are in place for RX 9 including the Repair Assistant, multichannel support, high-quality resampling, dithering, and the rest of RX's classic features. As always, RX 9 can be used as a standalone audio editor (including standalone but connected to your host via RX Connect, or as your DAW's audio editor in the case of Logic Pro), although much of it can be used as a suite of plug-ins in any DAW.

New Features

Dialogue Isolate

Dialogue Isolate is even more powerful in RX. The module features improved Ambience Preservation, leaving more natural sounding dialogue—even when noise reduction is pushed to drastic levels—to make sure your audience hears every word of your dialogue.

It is designed to separate spoken dialogue from nonstationary background noise such as crowds, traffic, footsteps, weather, or other noise with highly variable characteristics. It can be particularly effective at increasing the level of dialogue in challenging low signal-to-noise ratio conditions.

There are two Quality settings:

Good: for fast, high-quality processing that is optimized for speed over separation
Best: the highest quality processing with fewer artifacts and better isolation at the cost of a longer processing time

You can also use the legacy Dialogue Isolate algorithm from before version 9—choose this in the settings.

De-Hum

Dynamic mode in De-Hum instantly removes any amount of hum, wireless ring, or interference, without artifacts or affecting the audio quality. In one pass, eliminate radio and transmitter interference, camera and generator hum, and more.

In Static mode, you can target hum with a fundamental tone plus the 16 harmonic bands above it. In Dynamic mode, RX can learn and remove any amount of hum with up to 1024 dynamically variable notch filters.

Ambient Match

Ambience Match lets you match the noise floor of one recording to another recording. Fill in consistent beds of ambience under constructed sentences and ADR lines from within Pro Tools AudioSuite. No more spending hours of time manually looping sections of ambient sound under a scene with ADR and broken up sentences.

Seamlessly connect dialogue and ADR cuts with real background movement and textures with Complex mode, allowing you to quickly match ambiences never before possible: ocean, wind, traffic, crowds, and more. Or, use Static mode to match stationary ambiences like a quiet room with a soft hum.

Restore Collection

Roll back an audio selection to any previous step in your History list to get the best combination of audio processing from any point in time with the brand-new Restore Selection feature.

When hovering your cursor over an item in the History list with a selection made in the spectrogram, an icon appears in line with the text. Clicking this icon will restore your selection to that point in its history. This is the same as going back to that point in undo history, except only for your current selection.

Spectral Editor in Logic Pro

Spectral Editor allows Logic Pro users to put some of the most powerful iZotope processing and visualization to work—without having to toggle between Logic and the RX Audio Editor. It combines RX Spectral Repair, RX's spectrogram, and RX interactive tools that enable engineers and producers to identify and eliminate unwanted noises in Logic.

RX Features

Spectral Recovery

With the increasing necessity of remote meetings, podcast interviews, and video calls, real-time audio streaming is becoming more and more prevalent. Unfortunately, audio transfer protocols over the internet compress the audio and remove high-end frequencies that aid in clarity and intelligibility. Spectral Recovery restores frequencies above 4 kHz, turning grainy dialogue audio into clear, articulate recordings.

Wow and Flutter

Physical audio recordings, such as magnetic tape and vinyl discs, inevitably fall prey to the elements as time goes by. This often results in pitch fluctuations in those physical recordings. Wow and Flutter is designed to correct pitch issues regardless of the intensity. Use Wow to fix longer, sustained pitch drift, and Flutter to correct pitch variances that occur at faster rates.

Guitar De-Noise

Guitar De-noise lets you refine your guitar recordings for maximum clarity. Manage sounds unintentionally emphasized by the effects of compression or limiting, like electrical amp noise and interference, distracting fret or string squeaks, and harsh pick attacks. With intuitive sliders for sensitivity and gain reduction, polishing guitar performances for intelligibility and authenticity is now relatively easy and transparent.

Loudness Control

Prepare your recordings for final delivery with the detailed level readings and loudness-management power of the Loudness Control module. Load preset loudness-standard targets to ensure your audio conforms to broadcast requirements, and monitor your levels using the built-in numeric and histogram readouts for integrated, short-term, and momentary loudness. Plus, resize the module to fit your display perfectly and suit your unique workflow.

Improved Batch Processor

Process several audio files in one pass with the newly overhauled Batch Processor. View pertinent metadata in your audio files prior to processing, then apply a full series of processors with the Module Chain, now accessible from within the Batch Processor interface. At the end of it all, export your files in multiple file formats and bit-depths for optimal efficiency and organization. This tool is ideal for refining hundreds of samples for custom-made sample libraries.

Variable Time

Adjust the time-stretch amount of an audio selection without altering its pitch.

Variable Pitch

Adjust the pitch of an audio selection while preserving the time and length.

Improved Music Rebalance

Identify vocals, bass, percussion, and other instruments in a mix, and adjust the gain for each element. Isolate or remove elements, or split stems for tweaking in your DAW. The results sound more transparent over the previous version, nulling to a far greater degree.

Repair Assistant

Repair Assistant is an intelligent tool that detects noise, clipping, clicks, and more, allowing you to solve audio-restoration issues quickly and effectively. After analyzing any snippet of audio you select, it will provide three different options for processing and let you make the ultimate choice.

Dialogue Contour

Using this module, you can reshape the intonation of dialogue to rescue or improve a performance in postproduction. The module utilizes pitch-correction processing tailored to speech and designed to adjust inflection, allowing you to match phrases of dialogue that would not otherwise gel.

Dialogue De-Reverb

Reduce and remove unwanted reverb from dialogue clips using this algorithm trained with machine learning, optimized to separate spoken dialogue from reverberant signal content. You can use this as one more tool in the arsenal before resorting to ADR.

Multichannel Support

Tackle audio issues that appear in any or every surround channel up to Dolby Atmos (7.1.2).

De-Rustle

The De-rustle module removes the noise or rustle generated when a lavalier microphone rubs or brushes against a person's clothing during a recording. Lav rustle can vary unpredictably over time, exhibiting a wide variety of sonic characteristics in the process (high-frequency crackling and low-frequency thuds); this module significantly ameliorates the problem.

De-Wind

This module allows you to reduce—and sometimes remove—distracting wind noise from audio, addressing primarily the low-frequency rumble that occurs when intermittent bursts of wind come into contact with a microphone diaphragm.

Dialogue Isolate

The Dialogue Isolate module is designed to separate spoken dialogue from nonstationary background noise such as crowds, traffic, footsteps, weather, and more. It is suitable for increasing the level of dialogue in challenging low signal-to-noise ratio conditions.

Composite View

Composite View allows you to edit and apply processing to 16 individual audio tracks as if they were one, easily addressing audio issues that appear across multiple microphones. The Composite View feature in the RX Audio Editor combines all active tabs into one Composite tab that allows you to apply the same processing to multiple files simultaneously. Composite View can be used to increase expediency when performing repetitive spectral-editing functions. This makes it particularly useful when making repairs in recording situations with multiple microphones or repairs to multichannel files.

De-Bleed

Working across multiple tracks, the De-bleed module reduces the leakage of one signal into another. De-bleed can help reduce or eliminate bleed from headphones, click tracks, multiple mics with small amounts of cross-bleed, and even some drum-bleed issues.

De-Ess

The De-ess audio plug-in and module in iZotope RX 9 attenuates or reduces sibilance—the harsh high-frequency sounds that come from S, F, X, SH, and soft-C sounds. Two modes for handling sibilance are provided. Classic Mode detects sibilants and attenuates them with a broadband gain envelope. Spectral Mode is more transparent, intelligent, and frequency-specific than Classic Mode. Spectral Mode only attenuates the high frequencies where sibilance is most active, leaving the lower frequencies untouched.

Mouth De-Click

The Mouth De-click module has been finely tuned to detect and reduce mouth noises such as clicks and lip smacks—many listeners' worst nightmare. It's designed for use on longer audio selections, but it can be used to remove individual clicks.

Breath Control

The Breath Control module intelligently detects breath noise in dialogue or vocal recordings and suppresses them. Removing and reducing breath noise in recordings can be a time-consuming process for dialogue editors and music producers alike. Breath Control can help reduce the time spent on repetitive editing without sacrificing audio quality.

Separated Voice De-Noiser

The zero-latency Voice De-noise has been designed to focus on dialogue and sung vocal treatment. Voice De-noise has an Adaptive mode that can adjust to a changing noise floor in real time, making it ideal for dialogue de-noising. Also added are optimization modes for dialogue and music. When optimized for music, Voice De-noise excels at attenuating unwanted background noise from air conditioners and street noise, and also cleans sung vocals in apartment recording situations.

Key Features at a Glance

De-plosive eliminates every plosive from any dialogue track with transparency
Leveler smooths any volume inconsistencies with an automatic clip-gain envelope; leveler is optimized for dialogue using intelligent De-breath and De-ess algorithms
Instant Process tool is a one-click eraser for removing unwanted coughs, scene-interrupting sirens, and more
Module Chain can process multiple modules at once, save your customized chains as presets, and execute them all with a single click, enhancing workflow and reducing mouse clicks
Sync and integrate the RX Audio Editor with any DAW or NLE timeline using RX Connect
Corrective EQ for removing harsh high frequencies, whines, rumbles, resonances, and distortion artifacts, and for accurately homing in on any problem-frequency areas
Problem-oriented presets across several modules
Signal Generator creates accurate test tones, calibration tones for postproduction delivery specs, and bleep tones for eliminating obscenities in dialogue
Markers and regions (search) provide greater flexibility for those longer edits, with the ability to perform text-based searches of any markers, regions, and comments in the metadata of the audio
Turn flawed audio into usable material by removing noises, distortions, and more
Edit audio with visual editing techniques using precision drawing tools, such as a brush and magic wand
Salvage unusable material by filling in audio gaps instantly with Spectral Repair
Seamlessly integrates with audio- or video-editing software, both as a standalone application or plug-in
EQ Match allows for quickly learning the EQ of a source audio clip and applying that EQ curve to a target audio clip, enabling sonic balance and smooth transitions between multiple audio sources with different EQ qualities
Ambience Match for matching the environment noise of two different audio recordings
Learn the ambient noise from a source audio clip, apply it to another audio clip, and create long sections of constant ambient noise to insert under inconsistent dialogue recordings
High-quality resampling using the SRC sample-rate conversion algorithm
Reduce bit resolution for final delivery of a project without sacrificing quality with the MBIT+ Dither algorithm
Rebuild distorted audio caused by analog and digital overload, and get through projects faster with the automatic Suggest feature
Spectrum Analyzer delivers a detailed spectral display that detects peaks automatically
Adaptive Hum Removal notches out fundamental hum frequencies that may change over time, like when recording a shot in multiple locations
Nondestructive Clip Gain allows you to easily adjust and balance the volume of vocals and instrumentals
Export marker regions as files
Metadata display ID3 tags and broadcast WAV metadata like source timecode, etc.
Time-reverse audio
Updated timeline ruler that displays original recorded source timecode
Movable tabs
Full-screen support for Mac

Compare RX 9 Features

	Elements	Standard	Advanced
Dialogue Isolate** NEW ALGORITHM			x
Ambience Match** NEW MODE			x
Dynamic De-hum* NEW MODE		x	x
Spectral Editor NEW		x	x
Restore Selection NEW		x	x
Expandable History List IMPROVED		x	x
De-click*	x	x	x
De-clip*	x	x	x
Repair Assistant	x	x
Voice De-noise*	x	x	x
Static De-hum* NEW MODE	x	x	x
Music Rebalance***		x	x
Guitar De-noise*		x	x
Breath Control*		x	x
De-bleed		x	x
De-crackle*		x	x
De-reverb*		x	x
De-plosive*		x	x
De-ess*		x	x
Interpolate		x	x
Mouth De-click*		x	x
Spectral De-noise*		x	x
Spectral Repair		x	x
Loudness Control		x	x
Batch Processor		x	x
RX Connect		x	x
RX Monitor		x	x
Dialogue Contour			x
Dialogue De-reverb			x
De-rustle**			x
Spectral Recovery			x
Center Extract			x
De-wind			x
Wow & Flutter			x
Deconstruct			x
Third-party plug-in hosting	x	x	x
Fade	x	x	x
Find similar	x	x	x
Gain	x	x	x
Mixing	x	x	x
Module Chain	x	x	x
Module list filters	x	x	x
Normalize	x	x	x
Phase	x	x	x
Signal Generator	x	x	x
Spectrogram	x	x	x
Composite View	x	x	x
Recording and monitoring	x	x	x
Variable Time		x	x
Variable Pitch		x	x
Dither		x	x
EQ		x	x
Resample		x	x
Instant Process		x	x
Azimuth			x
EQ Match			x
Leveler			x
Surround support			x

* = Available as a plug-in

** = Available as a Pro Tools AudioSuite

*** = Available as a Pro Tools AudioSuite and in Logic Pro X as an ARA 2.0 plug-in

System Requirements

Operating Systems:

Mac: macOS Mojave (10.14.6) - macOS Big Sur (11.6)*

Windows: Windows 10
* Intel Macs or Apple Silicon Macs in Rosetta mode only.

Plugin Formats:

AU, AAX, VST2, VST3.

All plug-in formats are 64-bit only.

Supported Hosts:

Logic Pro, Pro Tools 2021, Live 11, Cubase 10.5-11, Nuendo 11, Studio One 5, Reaper 6, FL Studio 20, Audition CC, Premiere Pro CC.

$1,199.00

Add to Cart

iZotope RX™ 9 Standard Audio Repair Toolkit Elicense

RX 9 Standard Audio Editor

This product is delivered by download. We have an excellent relationship with iZotope and should receive the license code to complete your order within 24 hours. However, if you're ordering after 6:00PM PDT weekdays or on weekends, we'll process your order the next business day.

iZotope RX 9 Standard

The standard edition of RX 9 features several new and updated modules and algorithms including Dynamic De-hum, Spectral Editor, Restore Selection, and an Expandable History List.

The dynamic mode in De-Hum instantly removes any amount of hum, interference, or wireless ring without artifacts or affecting the audio quality. In one pass, eliminate radio and transmitter interference, and camera and generator hum. In static mode, you can target hum with a fundamental hum frequency plus 16 harmonic bands above it, while dynamic mode allows you to learn and remove any amount of hum with up to 1024 dynamically variable notch filters.

For Logic users, the Spectral Editor allows you to clean up unwanted sounds directly within Logic without having to toggle between the RX Audio Editor and Logic Pro. It combines RX Spectral Repair, RX's spectrogram, and RX interactive tools that enable engineers and producers to identify and eliminate unwanted noises, from within Logic Pro.

Restore History allows you to roll back any audio selection to a previous step in your History list to get the best combination of audio processing form any point in time. This allows you to select a point in history for only the current selection. The History list has been expanded to 30 undo steps for quick reference.

Previous features are in place, including the Repair Assistant, multichannel support, high-quality resampling, dithering, and the Module Chain. In fact, the Module Chain now works hand in hand with an overhauled Batch Processor to make treating multiple files a painless, easy endeavor. As always, RX 8 can be used as a standalone audio editor (but connected to your host via RX Connect) or as your DAW's audio editor (such as in the case of Logic Pro), though much of it can be used as a suite of plug-ins.

New Modules and Features

De-Hum

Dynamic mode in De-hum instantly removes any amount of hum, wireless ring, or interference, without artifacts or affecting the audio quality. In one pass, eliminate radio and transmitter interference, camera and generator hum, and more.

In Static mode, you can target hum with a fundamental tone plus the 16 harmonic bands above it. In Dynamic mode, you can learn and remove any amount of hum with up to 1024 dynamically variable notch filters.

Restore Collection

Roll back an audio selection to any previous step in your History list to get the best combination of audio processing from any point in time with the brand-new Restore Selection feature.

When hovering your cursor over an item in the History list with a selection made in the spectrogram, an icon appears in line with the text. Clicking this icon will restore your selection to that point in history. This is the same as going back to that point in undo history, except only for your current selection.

Spectral Editor in Logic Pro

Spectral Editor allows Logic Pro users to put some of the most powerful iZotope processing and visualization to work without having to toggle between Logic and the RX Audio Editor. It combines RX Spectral Repair, RX's spectrogram, and RX interactive tools that enable engineers and producers to identify and eliminate unwanted noises—right in Logic.

RX Features

Guitar De-Noise

Guitar De-noise lets you refine your guitar recordings for maximum clarity. Manage sounds unintentionally emphasized by the effects of compression or limiting like electrical amp noise and interference, distracting fret or string squeaks, and harsh pick attacks. With intuitive sliders for sensitivity and gain reduction, polishing guitar performances for intelligibility and authenticity is now relatively easy and transparent.

Loudness Control

Prepare your recordings for final delivery with the detailed level readings and loudness-management power of the Loudness Control module. Load preset loudness-standard targets to ensure your audio conforms to broadcast requirements, and monitor your levels using the built-in numeric and histogram readouts for integrated, short-term, and momentary loudness. Plus, resize the module to fit your display perfectly and suit your unique workflow.

32-Tab Limit for Audio Tabs

Time is precious when editing audio in post. To help you tackle more work faster, RX 8 doubles the previous 16-tab limit, now allowing you to view and edit up to 32 files within RX Audio Editor. Cover more ground in less time with greater efficiency and in-app real estate.

Horizontal Scrolling

Horizontal scrolling is now built into the intuitive Spectrogram Display. Use the scroll gesture on your trackpad or mouse with your cursor to scroll through your audio across the X-axis for lightning-fast edits.

Improved De-Hum

The De-hum module in RX 8 Elements uses an improved detection and reduction algorithm to automatically identify the base frequency of your unwanted hum and precisely remove it and its harmonics, ensuring a clean overall sound. For more complex hum and buzz removal, De-hum automatically recommends when to use De-noise instead, so you'll always have the best tool at hand for the job. Don't forget to use Adaptive mode to remove hum that changes in frequency over time.

Improved Batch Processor

Process several audio files in one pass with the newly overhauled Batch Processor. View pertinent metadata in your audio files prior to processing, then apply a full series of processors with the Module Chain, now accessible from within the Batch Processor interface. At the end of it all, export your files in multiple file formats and bit-depths for optimal efficiency and organization. This tool is ideal for refining hundreds of samples for custom-made sample libraries.

Improved Music Rebalance

Identify vocals, bass, percussion, and other instruments in a mix, and adjust the gain for each element. Isolate or remove elements, or split stems for tweaking in your DAW. The results sound more transparent over the previous version, nulling to a far greater degree.

Variable Time

Adjust the time-stretch amount of an audio selection without altering its pitch.

Variable Pitch

Adjust the pitch of an audio selection while preserving the time and length.

Music Rebalance

Identify vocals, bass, percussion, and other instruments in a mix, and adjust the gain for each element. Isolate or remove vocals.

Repair Assistant

Repair Assistant is an intelligent tool that detects noise, clipping, clicks, and more, allowing you to solve audio-restoration issues quickly and effectively. After analyzing any snippet of audio you select, it will provide three different options for processing, and let you make the ultimate choice.

Composite View

Composite View allows you to edit and apply processing to 32 individual audio tracks as if they were one, easily addressing audio issues that appear across multiple microphones.

De-Bleed

Working across multiple tracks, the De-bleed module reduces the leakage of one signal into another. De-bleed can help reduce or eliminate bleed from headphones, click tracks, multiple mics with small amounts of cross bleed, and even some drum bleed issues.

De-Ess

The De-ess plug-in and module attenuates or reduces sibilance (the harsh high-frequency sounds that come from S, F, X, SH, and soft-C sounds). Two modes for handling sibilance are provided. Classic Mode detects sibilants and attenuates them with a broadband gain envelope. Spectral Mode is more transparent, intelligent, and frequency-specific, and only attenuates the high frequencies where sibilance is most active, leaving the lower frequencies untouched.

Mouth De-Click

The Mouth De-click module has been finely tuned to detect and reduce mouth noises such as clicks and lip smacks—many listeners' worst nightmare. It's designed for use on longer audio selections, but it can also be used to remove individual clicks.

Breath Control

The Breath Control module intelligently detects breaths in dialogue or vocal recordings and suppresses them. Removing and reducing breaths in recordings can be a time-consuming process for dialogue editors and music producers. Breath Control can help reduce the time spent on repetitive editing without sacrificing audio quality.

Voice De-Noise

The zero-latency Voice De-noise has been designed to focus on dialogue and sung vocal treatment. Voice De-noise has an Adaptive mode that can adjust to a changing noise floor in real time, making it ideal for dialogue denoising. Also added are optimization modes for dialogue and music. When optimized for music, Voice De-noise excels at attenuating unwanted background noise from air conditioners and street noise to sung vocals in apartment recording situations.

Features

De-plosive eliminates every plosive from any dialogue track with transparency
Leveler smooths any volume inconsistencies with an automatic clip gain envelope; leveler is optimized for dialogue using intelligent De-breath and De-ess algorithms
Instant Process tool is a one-click eraser for removing unwanted coughs, scene-interrupting sirens, etc.
Module Chain can process multiple modules at once, save your customized chains as presets, and execute them all with a single click, enhancing workflow and reducing mouse clicks
Sync and integrate the RX Audio Editor with any DAW or NLE timeline using RX Connect
Corrective EQ for removing harsh high frequencies, whines, rumbles, resonances, and distortion artifacts, and for accurately homing in on any problem frequency areas
Multiple problem-oriented presets across several modules
Signal Generator creates accurate test tones, calibration tones for postproduction delivery specs, bleep tones for eliminating obscenities in dialogue
Markers and regions (search) provide greater flexibility for those longer edits, with the ability to perform text based searches of any markers, regions, and comments in the metadata of the audio
Turn flawed audio into usable material by removing noises, distortions, and more
Edit audio with visual editing techniques using precision drawing tools, such as a brush and magic wand
Salvage unusable material by filling in audio gaps instantly with Spectral Repair
Seamlessly integrates with audio or video editing software, both as a standalone application or plug-in
EQ Match allows for quickly learning the EQ of a source audio clip and applying that EQ curve to a target audio clip, enabling sonic balance and smooth transitions between multiple audio sources with different EQ qualities
Ambience Match for matching the environment noise of two different audio recordings
Learn the ambient noise from a source audio clip and apply it to another audio clip, and create long sections of constant ambient noise to insert under inconsistent dialogue recordings
Loudness module processes whole program mixes or segments to comply with international industry standards, ensuring mixes never fail network specifications
High-quality resampling using the SRC sample-rate conversion algorithm
Reduce bit resolution for final delivery of a project without sacrificing quality with the MBIT+ Dither algorithm
Rebuild distorted audio caused by analog and digital overload and get through projects faster with the automatic Suggest feature
Spectrum Analyzer delivers a detailed spectral display that detects peaks automatically
Adaptive Hum Removal notches out fundamental hum frequencies that may change over time, like when recording a shot in multiple locations
Nondestructive Clip Gain allows for easily adjusting and balancing the volume of vocals and instrumentals
Export marker regions as files
Metadata display (ID3 tags and broadcast WAV metadata like source Timecode, etc.)
Time-reverse audio
Updated timeline ruler that displays original recorded source Timecode
Movable tabs
Full-screen support for Mac

Compare RX 9 Features

	Elements	Standard	Advanced
Dialogue Isolate** NEW ALGORITHM			x
Ambience Match** NEW MODE			x
Dynamic De-hum* NEW MODE		x	x
Spectral Editor NEW		x	x
Restore Selection NEW		x	x
Expandable History List IMPROVED		x	x
De-click*	x	x	x
De-clip*	x	x	x
Repair Assistant	x	x
Voice De-noise*	x	x	x
Static De-hum* NEW MODE	x	x	x
Music Rebalance***		x	x
Guitar De-noise*		x	x
Breath Control*		x	x
De-bleed		x	x
De-crackle*		x	x
De-reverb*		x	x
De-plosive*		x	x
De-ess*		x	x
Interpolate		x	x
Mouth De-click*		x	x
Spectral De-noise*		x	x
Spectral Repair		x	x
Loudness Control		x	x
Batch Processor		x	x
RX Connect		x	x
RX Monitor		x	x
Dialogue Contour			x
Dialogue De-reverb			x
De-rustle**			x
Spectral Recovery			x
Center Extract			x
De-wind			x
Wow & Flutter			x
Deconstruct			x
Third-party plug-in hosting	x	x	x
Fade	x	x	x
Find similar	x	x	x
Gain	x	x	x
Mixing	x	x	x
Module Chain	x	x	x
Module list filters	x	x	x
Normalize	x	x	x
Phase	x	x	x
Signal Generator	x	x	x
Spectrogram	x	x	x
Composite View	x	x	x
Recording and monitoring	x	x	x
Variable Time		x	x
Variable Pitch		x	x
Dither		x	x
EQ		x	x
Resample		x	x
Instant Process		x	x
Azimuth			x
EQ Match			x
Leveler			x
Surround support			x

* = Available as a plug-in

** = Available as a Pro Tools AudioSuite

*** = Available as a Pro Tools AudioSuite and in Logic Pro X as an ARA 2.0 plug-in

System Requirements

Operating Systems:

Mac: macOS Mojave (10.14.6) - macOS Big Sur (11.6)*

Windows: Windows 10
* Intel Macs or Apple Silicon Macs in Rosetta mode only.

Plugin Formats:

AU, AAX, VST2, VST3.

All plug-in formats are 64-bit only.

Supported Hosts:

Logic Pro, Pro Tools 2021, Live 11, Cubase 10.5-11, Nuendo 11, Studio One 5, Reaper 6, FL Studio 20, Audition CC, Premiere Pro CC.

$399.00

Add to Cart

izotope/izotopetbc-2-digital-box-web.png

iZotope Tonal Balance Control 2 eLicense

This product is delivered by download. We have an excellent relationship with iZotope and should receive the license code to complete your order within 24 hours. However, if you're ordering after 6:00PM PDT weekdays or on weekends, we'll process your order the next business day.

Mastering software for a balanced mix.

Get decades of mastering expertise in your next session with tonal balance control 2, a plug-in that lets you overcome your listening environment and get a balanced mix that translates to your audience. Reference your track’s frequency balance against 12 different genre targets based on thousands of professional masters, or upload your own audio file to compare to a unique balance curve. Solo frequencies that are out of bounds, and make adjustments across your mix from within tonal balance control 2 using controls that talk to neutron 3, ozone 9, and other compatible izotope plug-ins. Whether you need a quick confidence check on a mix, or are perfecting your final master, tonal balance control 2 is essential for any project.

Tonal balance control 2 is included in ozone 9 advanced and neutron 3 advanced, and is now also available for separate purchase. Owners of ozone 9 advanced and neutron 3 advanced can update to the latest version of tonal balance control 2 via izotope product portal for free.

Create with confidence

Tonal balance control 2 is your second set of ears in a session, with 12 target curves representing popular music genres that help you stay on target no matter your listening environment. Load your own audio file to create a custom curve for when you’re looking for a specific vibe.

Fix issues in your session

Tonal balance control 2 can open an eq from an izotope neutron 3 or ozone 9 plug-in in your session, so you can fix balance issues from one plug-in window. Tonal balance control 2 can also talk to plug-ins like izotope nectar 3 or vocalsynth 2, letting you see how your vocal fits into your overall balance.

Get the complete picture

With improved fluid metering and resizability, it’s even easier to see every detail of your tonal balance. Work in broad view mode to get a general bird’s eye of your mix, or switch to fine view to zoom in on tough problem areas. Solo frequencies to hear exactly what’s contributing to your tonal balance, and quickly fix issues on your tracks with improved scaling that makes it easier to work with eqs in ozone 9 or neutron 3*

Ozone, neutron, nectar, and other compatible izotope plug-ins are not included with purchase of tonal balance control 2.

Izotope relay included

Adjust your tracks’ gain, pan, stereo image, and more with this lightweight mixing tool included with tonal balance control 2. Relay talks to tonal balance control 2 and lets you view the frequencies of any track against your tonal balance target, just by placing a relay on the track. Compare the balance of a track and see how it lines up with the rest of the mix, and make quick gain adjustments without leaving the tonal balance control 2 window

SYSTEM REQUIREMENTS

Operating Systems:

Mac: OS X 10.11.6 El Capitan - macOS 11 Big Sur*
* Intel-based Apple computers only (not yet ARM)

PC: Windows 7 - Windows 10

Plugin Formats:

AudioUnit, AAX, VST2, VST3
(All plug-in formats are 64-bit only)

Supported Hosts:

Logic Pro X, Ableton Live 9 – 10.1, Pro Tools 12.8 – 2019.12, FL Studio 20.6, Cubase 9 – 10.5, Nuendo 10, Wavelab 9, Sound Forge Pro 13, Sound Forge Mac 3, Studio One 4, REAPER 5-6, Reason 10, Audition CC 2019-2020, Premiere Pro CC 2019-2020, MASCHINE 2, Komplete Kontrol, Bitwig Studio 3.

$699.00

Add to Cart

Manufacturers

Categories

Specials [more]

New Products [more]

Home