Alto EMPIRE TMX80DFX 8-Channel Powered Mixer with Effects

Alto EMPIRE TMX80DFX 8-Channel Powered Mixer with Effects

$499.99

  • Shipping Weight: 13lbs
  • Manufactured by: Alto Professional
Description

Alto EMPIRE TMX80DFX 8-Channel Powered Mixer with Effects

The Alto EMPIRE TMX80DFX 8-Channel Powered Mixer with Effects is loaded with a total of 14 inputs comprised of 4 XLR jacks with phantom power, 8 line jacks and stereo RCA. These low-noise channels are beneficial when connecting instruments, mics, or even your iPod for playing between sets. Each mono and stereo channel has its own 3-shelf EQ, so you can dial in every nuance you need in seconds and in addition, there is a full 9-band stereo EQ. A/D and D/A conversion is performed with 24-bit precision, and easy-to-view knobs with smooth movement help to make mixing feel like playing a fine instrument.

The 8-Channel Powered Mixer is equipped with an on-board Alesis digital effects processor that provides pristine 24-bit, digital effects. The effects include echo, echo+verb, tremolo, plate, chorus, vocal, rotary, small room, flange verb, large hall. 100 Presets are included, leaving you with plenty of options for coloring the mix.

The TMX80DFX comes standard with the ability to deliver continuous power at 2 x 350W (4Ω) or 2 x 180W (8Ω). Whether you need just 8 channels, a full 20 or anything in between, the TMX80DFX is ready to handle your performance needs.

Features:

  • 14 total inputs including 4 XLR jacks with phantom power, 8 line jacks and stereo RCA
  • On-board digital effects processor and 3-shelf EQ on each mono and stereo channel
  • 1,400W peak
  • Continuous 2 x 350W at 4Ω (2 x 180W at 8Ω) with thermal, short and voltage protections
  • 48V phantom power

Specs:

Input Channels Mono channels: Channels 1 to 4
Microphone Input: Electronically Balanced, discrete input configuration
Frequency Response: 20 Hz to 22 kHz, +/-1 dB
Distortion (THD&N): <=0.005% @ +4 dBu, 1 kHz
Gain range: 0 to 50 dB (Mic)
Maximum Voltage Gain 70 dB Channel Mic input → Main Mix Out & Tape Out
80 dB Channel Mic input → Control Room & Phones
60 dB Channel Mic input → Aux Send
SNR (Signal to Noise Ratio): >=110 dBu
Phantom power (Mic Pin2/Pin3 & Pin1): +45 ~ +49 V with switch control
Line Input Electronically Balanced (SW to Line)
Frequency Response: 20 Hz to 22 kHz, +/-1 dB
Distortion (THD&N): <=0.005% at +4 dBu, 1 kHz
Gain range: 15 to 35 dBu
Stereo Channels: Channel 5 to 8
Line Input: Electronically Balanced (SW to Line)
SNR: >=110 dBu
Frequency Response: 20 Hz to 22 kHz, +/-1 dB
Distortion: (THD&N) <=0.005% @ + 4dBu, 1 kHz
Gain range: -20 to +20 dBu
60 dB Channel Line → Min Mix out
Maximum Voltage Gain 20 dB FX Return → Main Mix Out
20 dB RCA Tape Input → Main Mix Out
Microphone Impedance Impedance Microphone Input: 3.9 k?
All Other Input: 10 k? or greater
Tape Out: 1 k?
All Other Outputs: 120 ?
Equalization Mono channels
High: ±15 dB @ 12 kHz
Mid: ±15 dB @ 2.5 kHz
Low: ±15 dB @ 80 Hz

Stereo channels
High ±15 dB @ 12 kHz
Mid ±15 dB @ 2.5 kHz
Low ±15 dB @ 80 Hz

Stereo Graphic EQ
±12 dB @ 16 kHz
±12 dB @ 8 kHz
±12 dB @ 4 kHz
±12 dB @ 2 kHz
±12 dB @ 1 kHz
±12 dB @ 500 Hz
±12 dB @ 250 Hz
±12 dB @ 125 Hz
±12 dB @ 63 Hz
DSP Section A/D and D/A Converters: 24-bit
DSP Resolution: 24-bit
Type of Effects: Echo, Echo + Verb, Tremolo, Plate, Chorus, Vocal, Rotary, Small Room, Flange Verb, Large Hall
Presets: 100
Controls: 100-position preset selector, Clip LED, Mute Switch, Footswitch with LED indicator
Crosstalk Adjacent Input: <= -80 dB @ 1 kHz (Channel 1 to 6)
Input to Output: <=-75 dB @ 1 kHz (Stereo L/R, Channels 1-4, Pan: panned hard left or right)
Main Mix Section: Tape, Aux, Phones output level 0 dBu Unbalanced, 1/4" jacks
Max out: +22 dBu Unbalanced, 1/4" jacks
Main EQ (Option): +/-12 dB @ 9 bands (63, 125, 250, 500, 1k, 2k, 4k, 8k, 16 kHz)
Noise Bus Noise: <=-90 dB @ 20 Hz to 22 kHz (channel & Main level at 0 dB, other at minimum, DSP mute)
Electrical Frequency Response: 20 Hz to 20 kHz
Output level: 0 dB
S/N Ratio: >90 dB
Distortion: <0.05% @ 1 kHz
Power Specifications SPK Out Distortion: <0.1% @ 1 W & 1 kHz
Distortion: <0.15% @ 100 W & 1 kHz
Frequency Response: 20 Hz to 22 kHz, +/-2 dBu @ 100 W
SNR (Line In): >=100 dBu
Continuous Power 1 kHz, THD 1%, 2 x 350 W @ 4 Ω or 2 x 180 W @ 8 Ω Power EIAJ
1 kHz, THD 1%, 2 x 400 W @ 4 Ω or 2 X 200 W @ 8 Ω
Thermal Protection Over-temperature power limiting thermal shutdown
Temperature controlled 12 VDC fan output
Short-circuit protection
Overload output protection
Over voltage protection
DC offset shutdown
Power Consumption Static Power
No Output power state at 230 V: <= 32 W, 100 VAC, 50/60 Hz
Power supply: Main voltage 110-120 VAC, 60 Hz
220 to 240 VAC, 50 Hz
100 V: T12 A, 250 V
110 to 120 V: T12 A, 250 V
220 to 240 V: T6.3 A, 250 V
Dimensions (W x L x H) 12.0 x 10.1 x 2.9" (304.5 x 256.0 x 74.5 mm)
Weight 11.0 lb (4.8 kg)

UPC:816311010214

Reviews (0)

Manufacturers

Wish List

Log In to be able to add this product to your Wish List.

View more

Price Breakdown

Cart